============================================================================= Intel(R) Server Board SE7520AF20 ============================================================================= INTEL Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: July 14th, 2006 TO: Intel server platform SE7520AF20 customers SUBJECT: Intel SE7520AF20 BIOS Release Notes ver P12 12.00 - Build # 0113 ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel Products and for the purpose of supporting Intel developed server boards and systems. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (C) 2004-2006 Intel Corporation. ============================================================================= ABOUT THIS RELEASE ============================================================================= Build # : 0113 Build Stamp : SE7520AF20.86B.P.12.00.0113.071420060925 Build Date : July 14th, 2006 ============================================================================= BIOS COMPONENTS/CONTENTS ============================================================================= Processor supported: Intel(R) Xeon(TM) Processors with 1M L2 Cache Microcode update versions: CPUID Microcode Stepping 0F34h 17 D0 (Nocona) 0F41h 17 E0 (Nocona) 0F49h 03 G1 (Nocona) 0F43h 05 N0 (Irwindale) 0F4Ah 02 R0 (Irwindale) 0F48h 07 A0 (Paxville) System Hardware Configuration Supported: Intel Server Boards: SE7520AF2, BAF2BB, BA2HPBB. IMPORTANT NOTES: 1. Fab7 will reuse board ID of Fab2. So BIOS P.08 or higher should be used on Fab7. Older fabs still can use P.08 BIOS. 2. Paxville is supported only on Fab7. ============================================================================= SYSTEM FIRMWARE REQUIREMENTS/REVISIONS ============================================================================= BIOS Update Utility: AMI AFU 1.33 BMC FW : mBMC FW 2.40 or higher IMM FW 0.29 or higher FRU/SDR : FRUSDR 6.4.1 or higher HSC : 1.12 (SCSI), 1.08 (SATA) On-Board Component Option ROM Versions: LSI 1030 SCSI IME : 5.10.06 (F/W version 1.03.39) LSI 1030 SCSI IS : 5.11.03 (F/W version 1.03.39) ICH5R SATA RAID : 5.4.10281401I ATI Rage XL VGA : GR-xlints3y.019-4.333 Intel Pro/1000 NIC : 1.2.26 SROMBU42E : 514K or higher ============================================================================= SYSTEM FIRMWARE REVISIONS TESTED AT TIME OF RELEASE ============================================================================= - PC87431M mini-Baseboard Management Controller (mBMC): FW Revision 2.40 - Intel(R) Management Module (IMM) BMC: FW Revision 0.48 (if IMM card installed) - SE7520AF20 FRU/SDR package: AF-6.6.4 ============================================================================= INSTALLATION NOTES ============================================================================= IMPORTANT NOTES: 1. SE7520AF20 BIOS is not compatible with Windows 98 or Windows XP bootable diskettes. UPDATE INSTRUCTIONS: This instructions do not apply when running the update directly from the Software Update Package Menu. In that event, instructions displayed in the screen should be followed. The instructions below only applies when creating a BIOS update disk. 1. Create a bootable media. 2. Boot the SE7520AF20 server board with media created in step #1. 3. The media should have all batch files required to update the BIOS. 4. At the DOS prompt type run the run.bat file or type: afudos.exe /i[filename].rom /pb /c2 and press , where [filename] is the name of the BIOS ROM image. The update will show seven progress status as follows: Reading file .......... done Erasing flash ......... done Writing flash ......... done Verifying flash ....... done Erasing BootBlock ..... done Writing BootBlock ..... done Verifying BootBlock ... done After the Verifying status has reached 100 % (typically under 3 minutes), proceed to step #5. 5. Reboot system. During POST, enter BIOS Setup if you want to change any options. ============================================================================= BIOS RECOVERY INSTRUCTIONS ============================================================================= 1. Build Recovery media by preparing a formatted storage such as USB flash disk-on-key. 2. Rename ALIEFxxx.ROM to AMIBOOT.ROM and copy AMIBOOT.ROM to USB key. 3. Set Recovery Boot Jumper J1D1 (10-11). 4. Insert the Recovery DOS bootable media. 5. Power on system; during recovery update no video will be displayed. 6. Once flash udpate is complete, power off system and set jumper back to Normal mode J1D1 (9-10). NOTES: a. If system ROM is damaged (e.g. BAD checksum ), the system will perform BIOS recovery automatically. b. Jumper J2J3 (BIOS bank selection override) should set to pins 1-2 to select the correct BIOS flash bank. c. The recovery only supports the storages of both type 12 & FAT16. d. DiskOnKey should have a FAT12 partition and be formatted in DOS. One method is to boot with floppy and do the following at the DOS prompt: A> format b: /s . (DiskOnKey being device b: in this example). ============================================================================= KNOWN ISSUES/WORKAROUNDS ============================================================================= Build P.09.00.0106 - This release doesn't have microcode update for Paxville processor and Nocona G1 stepping processor. It will be available with P.09.20.0107. Build P.09.00.0105 - This release doesn't have microcode update for Paxville processor. It will be available with P.09.10.0106. Build RC01-102/RC02-103 - OS can't be installed on ROMB drive. This issue resulted from PXH IOxAPIC hiding. RC03-104 fixed it. Build RC01-093 - When iButton and memory are installed to enable ROMB, system will lock up. This issue is fixed with RC02-094. - Before and after memory initialization, BIOS send Sync SMBus command to IMM. This command often fails and causes BIOS to retry. This retry takes usually 10 ~ 15 seconds, so users may experience longer POST than before. (Up to about 60 seconds for video screen coming up) Build RC01-090 - In BIOS Setup->Processor Summary, CPU TM function & HW Prefetcher can't be set properly. It is fixed by RC02-091. Build P05-089 - None Build RC02-088/RC01-087 - Memory mirror option in BIOS Setup is available in RC01-087 BIOS. So RC01-087 is recalled and should not be used. RC02-088 disables and hides memory mirror option. Build P04-086 - None Build P03-085 - In Slot 1, PCI 66MHz adapters cannot be hot plugged well. Build P01-081 - PCI-X hot plug sometimes does not work. OS panic occurs under specific conditions. ============================================================================= FEATURES REMOVED ============================================================================= Build RC02-091 - Microcode update for N0 stepping CPU is removed from BIOS because microcode update is not at the level of production. Build RC01-090 - None Build P05-089/RC02-088 - None Build RC01-087 - Processor microcode update patches for A0/B0/B1/C1 steppings were removed. So if these old processors are used, there will be POST errors. Build P04-086 - None Build P03-085 - 4GBPlus eModule was deactivated to get more BIOS memory, IMT eModule can provide the same functions. - System Configuration Display support module was deactivated. - Removed extra bus allocation in hot plug resource padding because of system slowness issues during POST when PCI-Express slot is occupied. Build P01-081 - Extra PCI bus number allocation for PCI-Express hot plug slot is removed. When there is a PCI-Express card in slot, if extra bus number is allocated, blue screen occurs during Windows booting. ============================================================================= FEATURES ADDED ============================================================================= Build RC01.12.00.0112 - WOL from S5 feature Build RC01.11.00.0110 - New onboard SCSI option ROM for IME. See SYSTEM FIRMWARE REQUIREMENTS/REVISIONS for revision information Build RC01.10.00.0108 - SATA RAID option ROM update to v.5.4.10281401I Build P.09.10.0107 - Microcode update for G1 Nocona and A0 Paxville DP were added. Build RC02-103 - BIOS will beep 5 times if Paxville processor is installed on Fab 6 or older board. Paxville is supported only by Fab7. Build RC01-102 - Paxville support was added. - New microcode patches for all processor steppings are added. Please refer to BIOS COMPONENTS/CONTENTS section. Build RC01-100 - New onboard SCSI option ROMs and FW for IME/IS. See SYSTEM FIRMWARE REQUIREMENTS/REVISIONS for revision information - Front panel lock feature on mBMC configuration was missing in previous BIOS. It is implemented in this BIOS. Build P07-098 - New onboard video BIOS GR-xlints3y.019-4.333, to fix video blinking issue with IMM Advanced modules. Build RC02-094 - Latest Nocona E0 CPU Patch, M9DF4112 was added. Build RC01-093 - Latest Nocona N0 CPU Patch, M9DF4304 was added back - Memory mirroring feature is enabled (Setup option is added) - MMIO64 feature is added (Setup item is added) - New SCSI IS mode option ROM 5.11.02 is added - User can select SATA controller mode between Legacy and Enhanced. (Setup item is added) Build RC01-090 - Latest Nocona N0 CPU Patch, M9DF4304 was added. - Setup option "CPU TM function" was added for Thermal Monitor mechanism selection. Build P04-086 - Latest Intel Boot Agent 1.2.26 for Anvik-2 OB NIC Build P03-085 - Latest Nocona E0 CPU Patch, MBDF4109 was added. - Added ACPI MCFG table support. - Latest CPU module (CPU_07) contains support for Nocona E0 stepping - such as NX, enhanced C1E and enhanced TM2. Build P02-083 - BIOS workaround for MCH PIC errata (for C2 or older steppings) is added. - PCI hot plug resource padding is added. - Latest Nocona D0 CPU Patch, M1DF3413 was added. - Latest Intel Boot Agent (version 1.2.22). ============================================================================= ISSUES FIXED ============================================================================= Build RC01.12.00.0112 - Support R R reboot sequence from serial console - Exposing BMC resources via ACPI - Fix USB mouse can not work in NT4.0 when Port 60/64 emulation is enabled - Set ACPI S4 power state to IMM when system goes to hibernate - Fix DMA mode in SETUP was disappeared sometimes Build RC01.11.00.0110 - To fix the RSDT table bug on all the LH platforms to stuff a real name in instead or OEMRSDT - #25294 Clock throttled down to 66MHz when 3Ware 9500SX is plugged into 133MHz PCI-X slot Build P.10.00.0109 - When LSI SCSI card is installed in slot, shadow memory error occurs. - Red Hat Linux 9, kernel 2.4.20-8smp can not be booted from either ATA or SATA with one CPU installed and HT on. - #21439 Alief MBE - doesn't BSOD in windows Build RC01.10.00.0108 - LV processor mix issue solved - Fixed issue, "2GB DIMM size was displayed as 0 in SMBIOS table" - Fixed issue, "USB 1GB DOK does not work" - Fixed issue, "LSI SCSI card caused insufficient shadow memory error" Build P.09.10.0107 - When Paxville processor is installed, BIOS will display "Dual-Core" message Build P.09.00.0106 - When Paxville processor is installed, the number of processors was displayed for the number of cores. BIOS writer's guide teaches to display the number of sockets. Build RC03.09.00.0104 - #22101 [X]SMBIOS tool shows wrong PCI HW configuration - Echo TP disable bit is set for Paxville processor Build RC02.09.00.0103 - #20500 Cert-WHQL Alief fails Unreported Memory test on HCT 11.2 with IMM card installed - #20192 Win2k PCI bus rewake causes hang if device behind Dobson or PXH Build RC01.09.00.0102 - #21114 [x] Device ID of on-board video changes when a Pro/1000MT NIC is installed - #21278 USB mouse not working on Intel RAID cards BIOS Console. This change requires the use of ROMB option ROM 513J or higher. - If IMM is installed, Chassis Part/Serial number is not displayed in Setup. Buffer size was too small and it was fixed. - Jarrell PXSA4 Adapters (defect 76119) issue fix was merged. - Memory ECC error logging feature is revised. 10 or more SBE will disable further SBE error logging with RAS Mirror mode. And when MBE happens, BIOS logged double SEL logs. Now, correct number of SEL logs are logged. - PCI-E error logging feature is revised. P08 BIOS treats all PCI-E errors as SERR errors, so NMI was fired even when correctable PCI-E error happens. Now new OEM SEL format was made for PCI-E errors and BIOS will not fire NMI for non-critical PCI-E errors. - Jarrell fix, 75243 - Serial can not work when VGA is disabled, was merged. Build RC01.08.00.0100 - Various MMIO64 related issues are fixed. P.07 BIOS caused so many issues after MMIO64 feature was pulled in. Now PCI resource is allocated correctly - Fixed many foreign language mistranslation - When front panel is locked, CMOS should not be cleared by front panel key sequence. This issue is fixed. - In symmetric memory mode, wrong DIMM number was reported in SEL. Now correct DIMM number is reported. - PCI-SIG PCI-E test failure issue is fixed - BIOS will list all boot devices in popup menu. It is #76127 - Jarrell tracker #76002 - FRB4 policy only work at the 1st time but failed at 2nd time or later - EIST feature was broken in P.07 BIOS. It was fixed and updated. - #18868 Error message during booting of RHEL AS using smp kernal. It was caused by wrong MPS table. - #19739 [x] Alief board hangs when booting WinPE when AMI G3 card with USB cable connect - #19866 [X]W/O IMM, BIOS setup has no "power & reset switch inhibit" - #19917 SRCU42X device driver for RedHat EL3.0 update2 makes SCSI timeout - #19965 [x] Hardware Malfunction Blue Screen when updating Intel Chipset Drivers PCI-E error logging code was modified to address Marvell NIC issue - #20105 PCI video card detection Failure at Alief BIOS P07.10.0096. P.07 BIOS has MMIO64 feature, which was broken. P.08 BIOS has fix for this and it will fix similar issues. - #20178 [X] PXE operation has degraded since BIOS P04 To address this issue, if we have Non-DRAM lock error, it is logged just once. - #20305 Multibit error injection does not cause NMI when sparing enabled. - #20312 [x] UUID being erased after BIOS update on some PHP Alief boards Rolling BIOS code was updated to address this issue. - #20334 Local system is not booted with ASR-2200S. - #20500 Cert-WHQL Alief fails Unreported Memory test on HCT 11.2 with IMM card installed Build P.07.30.0099 - #19708 AMCC 9xxx Adapter doesn't get it's BAR set properly - IMM Adv card & onboard video issue Build RC01.07.20.0097 - #20126 CMOS checksum is not saved once - #20146 Headless KVM does not work in Windows Build P.07.10.0096 - #19822 Very slow booting of the Alief and Jarrell system if KVM is enabled - #19750 The date of the SEL is inconsistent with the date of the BIOS - 74636 Set system boot option issue Build RC02-094 - #19803 Memory Mirroring on RC01.07 Build RC01-093 - #19417 Sony ATAPI Tape Drives not achieving expected transfer rate. - #19668 [X] HSBP revisions incorrectly listed in BIOS Setup - #19669 [x]SMBIOS Rec 3 contains "To Be Filled By OEM" on some fields and must be removd - #18752 Alief BIOS no longer has capability to change from Enhanced Mode to Legacy Mode - #19303 [x] System does not boot with USB DOK 1.0GB - #19652 Supervisor password in BIOS can be cleared although user password is installed - Defect 71521 - Customer requires new BIOS setup option for special MPS handling of HTT CPU for FreeBSD v4.5 compatibility. - SOL F2 key press from remote system issue, function key doesn't work during POST if no k/b attached and [Serial Console Redirection] is enabled - Fix update micro code for any other stepping not present in NCBLK2, will destroy previous micro code, seen with testing with Checkup7 utility. - When disable "Hit F2 Message display" under Boot Settings Configuration, it only disable on POST screen, but not disable on Logo screen. - DOSCMOS module was updated to revision 05 Build RC02-091 - #19476 W2K not seeing 16GB of memory correctly Build RC01-090 - #19385 [x] Help text for PCI slots on the non PHP board state slot is hot-pluggable - #19386 [x] Failure to enter correct Admin Password in BIOS not behaving correctly - When CMOS checksum is broken intentionally, BIOS didn't load default to CMOS - Workaround is added for MCH BIOS spec. update 1.02 errata 32 - #19426 [X]LSI MegaRAID 320-2 's hotkey "Ctrl+M" doesn't work, worked with P03, not afterwards - #19358 KVM support - #19303 Booting to 1GB USB disk on keys - In order to improve system performance it has been requested that the BIOS always program D8:F0:R4Ch bits [13:0] to 0 Build P05-089 - #19302 [x] Keyboard mispelled as "Keybaord" on BIOS Setup Build RC02-088 - None Build RC01-087 - #18258 Alief Hotplug slot 1 enters into unknown state (Note) 18258 is partially fixed and under verification. - #18562 Need support for the BIOS sending the Set ACPI Power State cmd to the BMC - #18758 Memory RAS: GetDIMMStatus command does not give status of failed/disabled DIMMS - #18786 Do not generate NMI for correctable PCI-E errors - #18857 [HPC] Redhat EL 3.0 AS can be installed only when ACPI is disabled. - #18892 Front side bus mismatch error was occurred during POST. - #18974 Kernel panic occurs during Red hat EL 3.0 shutdown sometimes. - #19006 Improper error occur during EFI boot. - #19043 System halts for user password during secure boot - #19255 [x] Pressing ESC in posting will cause ROMB/LSI RAID configuration entry fail. - #19283 Pressing esc key during POST precludes entering Raid Controller Option ROM - #19286 [X]HSBP FW version shown as N/A in BIOS Setup - #19306 CRERR04 - during console redirection and EMP is enabled. - #19327 CMOS Variables need to follow PM I EAS spec - #19347 Alief P04: Size of DIMM is not populated for spared DIMM in SMBIOS table 17 - #19355 SetSystemBootOptions to have console redirection on next boot not overriding bio Build P04-086 - #19081 Advanced IMM stealing IP address's. Alief BIOS sent wrong GUID to mBMC/Sahalee. - #18526 BIOS needs to lock & unlock BMC access to SMBus by sending sync SMBUS command to BMC. - #18272 Least Featured BSP / Processor Disable causes hang when PIC workaround is included. - Moved the PIC workaround to the end of POST Build P03-085 - #18908 PCI-E error status register errata was fixed. - #18844 Increase length of SMBIOS Type 1 product name field. - #18720 In single channel memory configuration, POST error reports that channel B has problem though multi-bit memory error is injected to channel A. - #18685 Insertion of I button disables SCSI bios settings SROMBU42E. - #18870 BIOS Setup showing SCSI and ROMB options eventhough they are not available. - #18898 Though 'Critical Event logging' options in BIOS setup / Server is disabled, ECC event is logged in SEL when SBE or MBE is injected. - #18758 GetDIMMStatus command does not give status of failed/disabled DIMMS. - #18896 When CMOS jumper is set, BIOS setup shows that all memory slots are populated. - #18756 Image of Logo is displayed if the user presses to enter BIOS setup. - #18757 Requested key message corrupts option rom message. - #18372 System hangs after LSI MegaRAID SATA 150-4 drive scan. - #18517 Boot failed at POST code "7C" when install MegaRAID SATA 150-6 to slots 1, 5, 6. - #18722 When multi-bit error is injected, system responds - Change to MBE handler FERR/NERR: Bit 1/9 set (fatal) = uncorrectable read error, BIOS must NMI after processing error Bit 5/13 set (non-fatal) = DED retry occured. If bit 1/9 are NOT set, then BIOS must not NMI but should report DED retry similar to SEC error. If bit 1/9 ARE set, then NMI. - Change BIOS setup 'NMI control' option to have its default value changed to enabled. - #18577 Unable to enter RAID configuration utility for Intel SRCU42L. - #18570 Unable to connect to test server with BIOS P01. - #18620 SUT can not boot with off-board SCSI card. - #18576 When SLOT option ROM of BIOS was disabled, cards appeared during POST. - #18554 System hangs if USB function is disabled in BIOS setup. - #17713 Only when wakeup by PS2 KBD or mouse is enabled, wakeup by Ring works. - #18314 Intel logo do not disappear even if keyboard is pressed. - #18580 F2 Key press to enter BIOS is corrupting the screen and system hang. - #18560 Intel SRC16S will not power on when plugged into PCI-X HP slots. - #18624 BIOS string displayed wrong during POST and in Setup screen. - #18571 Failed to create RAID volume on FastTrak S150 TX4. - #18272 System did not booted when BSP is disabled. - #16935 Resetting from CLI with Professional IMM causes freeze during reboot process. Remove int15h call to support MWA from kill_lan_stack routine. - #18512 Change BIOS to not assert FRB_HLT signal when only mBMC is in the system. Build P02-083 - #18218 New MCH Errata concerning hang during PIC mode w/ HT Disabled. - #16421 BIOS needs error propagation registers enabled. Build P01-081 - #18377 'Error (0043) : Pressed' POST error occur. - #18501 BIOS not detecting incorrect firmware. - #18418 DIMM presence detection: Can't detect presence of single DIMM - Spread spectrum was disabled by default. - Recovery boot failed. - If SATA RAID is enabled, system hangs at post code 78 ============================================================================= REFERENCE MATERIAL ============================================================================= Intel(R) Server Platform SE7520AF20 Technical Product Specification (TPS) [END OF RELEASE NOTES]