|
Known
Issues in 8.9.0.1023 Production Version
|
|
Reference
No
|
Description
|
Affected
OS's
|
|
N/A
|
System hangs and error message
that says: ERROR_NO_SYSTEM_RESOURCES or ERROR_NOT_ENOUGH_QUOTA may be
observed when writing large numbers of files on Windows XP with Service Pack
2
Workaround: Contact Microsoft* to receive the hot fix described by KB
article 888413
|
|
|
2688481
|
Errors seen after volume data
verification on expanded RAID volumes
|
Vista, XP
|
|
2688477
|
Fail to modify Recovery Volume via
"Volume Modify"
|
Vista, XP
|
|
2688400
|
No illustration & detail
appear in Basic View while RAID1 is Rebuilding
|
Vista, XP
|
|
2688383
|
Port Number and Number of Disks
shows incorrect in Basic Mode View
|
Vista, XP
|
|
2688382
|
No information of RAID0
"Failed" appear in Basic View
|
Vista, XP
|
|
2549948
|
Creation of a RAID0 volume fails when disk used for creation is a
spanned or dynamic disk
|
Vista
|
|
2519035
|
D-state cycling single disk during initialization 3 drive RAID5
causes volume to fail after pulling power to a single drive
|
Vista
|
|
2518139
|
User Interface Basic mode displays unknown port when 2 disks
have smart errors
|
Windows XP
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista, Windows XP
|
|
106842
|
'Volume Creation Completed' message covered by User Interface
|
Windows XP
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, and Modify Recovery
Volume Wizard.
|
Vista
|
|
2552285
|
Unable to create RAID volume when sufficient drives are present
after hot-remove/reinsert
|
Windows XP-64
|
|
2553015
|
When initiating RAID1 rebuild will get message “Wizard unable to
start rebuild process” but rebuild happens
|
Windows XP
|
|
2330162
|
User Interface Progress dialog: progress bar missing, bitmap corrupted
or missing, or cut text
|
Vista
|
|
2553091
|
Check for Correct Recovery Volume, selecting BACK during
creation causes recovery drive to change
|
Vista-64
|
|
2554032
|
Partition disappeared but the ‘disk’ did not in Vista failing RAID 10 testing
|
Vista
|
|
2554217
|
IOMeter* sequential writes on 6-disk R5 slow
|
All OS’s
|
|
2554610
|
IAAMonitor App not responding while shutdown after Safe Mode
installation
|
Windows XP
|
|
2554680
|
File write performance degraded with Gen II drives and Cache On
|
Vista, Windows XP
|
|
2553965
|
Unable to load driver using f6 during system repair or system
restore process under Vista
|
Vista, Vista-64
|
|
77332
|
Failure to enumerate disk causes crash in Intel Matrix Storage
Manager
|
Windows XP
|
|
2553384
|
SATA ODD never gets spin down request or D1 power event
|
Vista
|
|
2554879
|
Driver property page port location information is incorrect on
ICH9M
|
Windows XP
|
|
2555515
|
System lock due to low memory - with DVD playing and IO
|
Windows 2003
|
|
2556588
|
Degraded/Normal/Master Offline goes Normal on failed volume
|
Vista
|
|
2556593
|
Degraded/Syncing state, recovery disk failure/remove does not match
state table
|
Vista
|
|
2556715
|
Sync does not re-start with invalid partner in manual sync mode
|
Vista-64
|
|
2556718
|
Basic Mode - Extra port number shown on the right side of the
Volume Picture
|
Vista, Vista-64, Windows XP
|
|
2556799
|
Fast sync log is corrupt if no data is written to new volume
|
Vista-64
|
|
2556732
|
DC Mode – “ Enable continuous mode” button label does not change in basic mode
once the recovery volume level is changed from 'request' to 'continuous',
|
Windows XP
|
|
2556766
|
Modification of one volume fails during migration of a different
volume
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556767
|
Creating a volume from an existing disk during migration of another
volume returns an error message that the existing the wizard need to close
before opening a new wizard
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556995
|
HEB/ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2662461
|
Action unavailable to “Delete volume” or “Reset HDD to Non RAID”
in Console, when you try to delete a unsupported recovery volume or reset the
member disk of the recovery volume under Intel® Matrix Storage Manager
console on ICH9R
Workaround: To delete recovery volume or reset disk to non RAID, go to
OROM UI
|
Windows XP-64
|
|
2662524
|
0xD5 blue screen error with Driver Verifier While Hot Plugging
from one drive to another on same port
|
Vista-64
|
|
2662475
|
A Dirty Shutdown of a Recovery volume while in DC mode will
cause the volume to fail instead of causing the fast-synch log to be
invalidated
|
Windows XP
|
|
2556947
|
0x7B blue screen error after install driver in AHCI mode when
drive with metadata in the system
|
Vista-64
|
|
2662540
|
RAID volume rebuilding happens on different volume than it is
suggested by UI Wizard when two degraded volumes are available on the system
|
Windows XP
|
|
2662548
|
Text misaligned in Modify Volume Wizard 3rd screen
|
Vista
|
|
2662561
|
Stall I/O to a disk connected with bad sata cable and does not
restart
|
Vista
|
|
2662520
|
UI wizard allows user to select non-OS drive as a master drive
when there are only 2 drives
|
Vista
|
|
2662523
|
Creation of raid volume failed when another drive [which is not
involved in setup] is pulled out. Issue does not occur with scenario
"create from existing"
|
Vista
|
|
2662501
|
HEB/ARA: Bitmap image appears in title of Create Recovery Volume
Wizard screens
|
Vista
|
|
2687790
|
HIPM/DIPM mixed
mode-Device Initiated Power Management is not working for SATA ODDs
|
Vista
|
|
2687769
|
ARA/HEB/ELL/RUS: Port names are corrupted in the Basic Mode
after creating RAID 1 volume
|
Windows XP
|
|
2330162
|
UI Progress dialog: progress bar missing, bitmap corrupted or
missing, or cut text.
|
Vista
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, Convert RAID 1 to
Recovery Volume Wizard, and Modify Recovery Volume Wizard.
|
Vista
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista
|
|
2556995
|
HEB/ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2687830
|
ELL/HUN: Cut text in dialogs with " - Encrypted"
string
|
Vista
|
|
2687894
|
HUN: The first option-" Enable Continuous Update"- on
the right click menu of recovery Volume has corrupted characters.
|
Windows XP
|
|
2687971
|
CHT: Incorrect Translations on Error message when migrate a
volume with encrypted hard drive
|
Vista
|
|
2687995
|
When a missed locked member disk of a degraded raid1 volume is
plugged back and unlocked in the BIOS,
the locked member disk of the raid 1 volume
shows a status of "failed" in the UI or "Error Occurred"
status at the OROM UI
|
Windows XP
|
|
2688016
|
Reads to a pass-thru drive hang during migration of 3 drive RAID 0 volume to 4 drive RAID 0 volume and
intermittent blue screen error happens upon deleting the volume after hang
when the Intel matrix storage manager console is open
|
Vista
|
|
2688060
|
Expansion of volume failed from four disk RAID5 to five disk
RAID5
|
Vista-64
|
|
2688076
|
After enabling recovery drive in OROM and rebooting to OS upon
master drive failure, Intel Matrix Storage Console failed to display the
“Switch to Advanced Mode View” button and partially displayed the Basic Mode
GUI.
Workaround: Go to “View->Advanced Mode” to see the drives and
parameters
|
Windows XP
|
|
2688092
|
Disk Manager Does Not Show RAID Volume After Unlocking Passwords
on Member Disk(s) in the Intel Matrix Storage Console
|
Vista
|
|
2688093
|
A
Degraded Rebuild on a > 2TB volume fails with unexpected verification
errors during a rebuild
|
Vista-64
|
|
2688191
|
Unable to
boot to ‘On Request’ ‘Recovery’ drive that was part of a recovery volume i.e
ghosted when Intel® Turbo Memory is enabled
|
Vista
|
|
2688235
|
‘Reverse
sync’ does not continue when master disk is removed during the sync and
reinserted in system
|
Vista,Vista-64,Windows XP
|
|
2688271
|
Attempting
to Cancel Disable Continuous Update Proceeds with Action Anyway
|
Vista-64
|
|
2688316
|
Blue screen
error d5 booting from recovery disk and setting it to manual sync
|
Vista-64
|
|
2688388
|
Basic
mode UI shows RAID creation options while volume is initializing
|
Windows
XP
|
|
2688437
|
Immediately
After Creating Recovery Volume Selecting Disable Continuous Updates Causes OS
to Hang
|
Windows
XP-32bit
|
|
2688443
|
Basic
Mode Shows Incorrect Recvoery Volume Update Status after disconnecting on of
the disks in the recovery volume
|
Windows
XP
|
|
2688453
|
System
Unstable After Entering/Resuming from S3 after RAID volume is unlocked in the
UI
|
Windows
XP
|
|
2688454
|
When a
RAID volume has at least one locked disk in it, the right-click options for
the volume still show options available when there shouldn't be any options
available for a locked volume.
|
Vista,Windows XP
|
|
2688456
|
Console
does not show locked volume icon with RAID 5 volume containing locked disks
|
Windows
XP
|
|
2688459
|
Blue screen
error D5 after disconnecting locked drive during rebuild
|
Vista-64
|
|
2688463
|
After
Entering BIOS Password for Locked Disk During Resume from S4 Disk/Volume
still shows as Locked
|
Windows
XP-64
|
|
2688466
|
After Disconnecting
Locked Disk From RAID1/5/10/recovery Volume, the Volume is Shown as Degraded
But is Not Exported to OS
|
Windows
XP-64
|
|
2688468
|
The
message shown when exceeding the limit for incorrect password entries is misleading
instructing the user to reboot the system to try again instead of shutdown
|
Vista
|
|
2688482
|
After
manual scan in the UI when the drives part of a RAID 1 volume are removed, volumes
will still be shown as degraded, and the drives that were not pulled in the
test are shown as missing
|
Vista
|
|
2688488
|
Blue
screen error 7E Occurred During Power management and ‘Access recovery drive
files’ Cycling
|
Vista,Vista-64
|
|
2688501
|
OS fails
to load When disk write caching is turned Off on some drives
|
Vista,Windows XP
|
|
2688691
|
Metadata
is stored on target hard drive even when the UI blocks creation of recovery
volume
|
Vista
|
|
2723557
|
Full
array expansion w/ new disk fails
|
Vista,Vista-64,Windows XP-64
|
|
2723596
|
7E blue
screen error when hot plugging recovery member disk during volume update.
|
Vista
|
|
2723749
|
Hot-plug
e-sata/ODD results in OS and external ports to disappear from UI in AHCI mode
where the disk manager still sees the drives
|
Vista,Windows XP
|
|
2723883
|
No hard
drive or volume status in Basic View when booting from Recovery disk
|
Vista-64
|
|
2723887
|
Disk goes
into unknown state when expanding a RAID5 volume
|
Vista-64,Windows
XP
|
|
2723895
|
Driver
exports recovery disk for Recovery volume when recovery drive is unplugged
and reinserted during a manual sync causing the system to hang on ICH9R
|
Windows
2008
|
|
2723989
|
Blue screen
error 7B seen intermittently after Win7 install on ICH8R
|
Win7
|
|
2723998
|
Disks going offline after deleting RAID 1 or Recovery volume
Workaround: Win7 includes a change
to mark newly discovered disks offline if they have the same signature as an
already existing disk. This happens in Recovery/RAID1 because the
recovery drive is a mirror of the master. You can manually go into disk
management and mark the disk online to get around the issue
|
Win7,Win7-64
|
|
2724015
|
AHCI driver fails to F6 install and blue screen error 7B is seen
on Windows XP OS intermittently
|
Windows XP
|
|
2724018
|
Restart after capacity expansion fails on 2TB testing
|
Win7
|
|
2688135
|
Console can configure eSATA HDD as a spare HDD on sku’s that
block ESATA for RAID volume creation
|
Vista-64
|
|
2688381
|
RAID F6 driver when installed twice causes blue screen error
|
Vista
|
|
2688509
|
Automatically DVD playing fail to start with showing Windows
error Dialog with Corel* WinDVD* application
|
Vista
|
|
2724057
|
Creation of a RAID 1/Recovery volume from OS results in
intermittent drive hangs and upon reboot marks the source drive as failed.
Volume marked as normal upon rebuild to the failed drive once recovered
|
Vista, Win7
|
|
2724060
|
Recovery
volume is not visible under ‘My Computer’ when Access Recovery Volume
selected in Win 7.
Workaround: Win7 includes a change to mark
newly discovered disks offline if they have the same signature as an already
existing disk. This happens in Recovery/RAID1 because the recovery
drive is a mirror of the master. You can manually go into disk
management and mark the disk online to access the recovery drive
|
Win7,
Win7-64
|
|
2724079
|
Driver
Version not found in System Report on ICH9M AHCI mode
|
Windows
XP-64
|
|
2724082
|
After
S3/S4 a Previously Unlocked Volume is Shown as Locked But is Exported to OS
|
Win7-64
|
|
2724329
|
Verify Volume
Data finds errors after Win7 upgrade on Recovery volume
Workaround: Set the recovery volume in manual
mode before upgrading to Win7
|
Win7
|