This release note and the software that accompanies it are copyright (c) 2009, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software.

This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation.

==========================
Supported RAID Controllers
==========================
This download supports Intel(R) RAID controllers using SAS software stack (SRCSAS18E, SRCSAS144E, SROMBSAS18E, SRCSASJV, SRCSASRB, SRCSATAWB, SROMBSASFC, SROMBSASMP2, SROMBSASMR, SRCSASPH16I, SRCSASBB8I, SRCSASLS4I, RS2WC040, RS2WC080, RS2MB044, RS2BL080, RS2BL080DE, RS2BL040, RS2PI008DE and RS2PI008), please verify that this utility has been tested with the RAID card you have chosen to use by checking the drivers web page for your controller at http://support.intel.com.

===================
Package Information
===================
Driver Version = 4.05
OS supported = SCO* UnixWare* Release 7.1.4 & SCO* OpenServer* Release 6.0.0

=========
Attention
=========
N/A

==================
Known Restrictions
==================
N/A

=======================
Contents on the package
=======================
The following files are included in this package:

Name					Description
ir3_SCO_DRV_v4.05_readme.txt		This File
megasas_sco.iso				SCO driver ISO image
megasas_sco.image			SCO driver floppy disk image
License_v2.pdf				License Agreement

=========================
Installation Instructions
=========================
Below instruction includes how to manually update driver.

I. Installation

While installing OpenServer 6/UnixWare 7 be sure to insert the megasas 
Driver Supplement media before any HBA drivers supplied with your media kit.

Use the following steps on a OpenServer 6/UnixWare 7 system to create
an HBA floppy from the HBA floppy image file.

        1. Become root and create a new directory by typing:

                $ su
                Password: <type your root password>
                # mkdir /tmp/hba
                # cd /tmp/hba

        2. Download the megasas_sco.image file to the newly
           created /tmp/hba directory on your machine.

        3. Make an megasas HBA diskette from the image file using this command:

                # dd if=megasas_sco.image of=/dev/dsk/f0t obs=36b

        4. Use this megasas HBA diskette during system installation.

Use the following steps on a OpenServer 6/UnixWare 7 system to create
an HBA CD from the HBA ISO image file.

        1. Become root and create a new directory by typing:

                $ su
                Password: <type your root password>
                # mkdir /tmp/hba
                # cd /tmp/hba

        2. Download the megasas_sco.iso file to the newly
           created /tmp/hba directory on your machine.

        3. Make an megasas HBA CD from the iso file using this command:

                # cdrecord -v -dev=c,b,t -dao -driveropts=burnfree -speed=99 megasas_sco.iso

                where c,b,t is taken from the output of cdrecord --scanbus

        4. Use this megasas HBA CD during system installation.

------------------------------------------------------------------------
II. Upgrading drivers on existing OpenServer 6/UnixWare 7 system

The megasas HBA diskette can also be used to upgrade the megasas driver
on your system using the following command:

         1. Insert the HBA driver diskette and type the command:

                # pkgadd -d diskette1 all

                  or

                # pkgadd -d diskette1 megasas

The megasas HBA CD can also be used to upgrade the megasas driver
on your system using the following command:

         1. Insert the HBA driver CD and type the command:

                # pkgadd -d cdrom1 all

                  or

                # pkgadd -d cdrom1 megasas

==================
Component Features
==================
N/A
		
============
Known Issues
============
N/A

=============
Fixes/Updates
=============
Version 4.05 - Initial Release
 
*Third-party trademarks are the property of their respective owners.