================================================================================ Intel(R) Server Board S2600GZ/GL, Intel(R) Server System R1000GZ/GL Product Family and Intel(R) Server System R2000GZ/GL Product Family Firmware Update Package for Intel(R) Deployment Assistant, Intel(R) One Boot Flash Update Utility, The embedded EFI Shell, Windows* Preboot Execution Environment ================================================================================ Intel Enterprise Platform & Services Division - Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : March. 06, 2012 TO : Intel(R) Server Board S2600GZ/GL, Intel(R) Server System R1000GZ/GL Product Family and Intel(R) Server System R2000GZ/GL Product Family customers SUBJECT : Release Notes for System Firmware Update Package ================================================================================ ABOUT THIS RELEASE ================================================================================ BIOS : 01.02.0003 ME : 02.01.05.069 BMC : 01.04.2896 FRUSDR : 1.01 ================================================================================ Support Platforms and Dependency ================================================================================ Intel(R) Server Processors supported: Intel(R) Xeon(R) Processor E5-2600 series Microcode update versions: Intel(R) Xeon processor E5-2600/2400 series C0 stepping: 0x80000513 CPUID = 0x206D5 Intel(R) Xeon processor E5-2600/2400 series C1 stepping: 0x80000613 CPUID = 0x206D6 Intel(R) Xeon processor E5-2600/2400 series C2 stepping: 0x80000708 CPUID = 0x206D7 Production boards: Product Fab Version S2600GZ/GL Fab3 or above The following update process must be followed to ensure a trouble free update. 1. BMC firmware 2. BIOS 3. Manageability Engine (ME) firmware 4. FRUSDR ================================================================================ System Firmware Update Package Usage instructions ================================================================================ This package can be updated using one of the following methods: - The embedded UEFI shell - Intel(R) Deployment Assistant - Windows* or Linux* operating system using Intel(R) One-boot Flash Update (OFU) V11.0 Build 7 or later) - Windows* Preboot Execution Environment (WinPE) To update from the embedded EFI Shell Update system firmware from Intel server EFI shell by the following steps: - Download Intel server system firmware update package from http://downloadcenter.intel.com/ - Unzip package and copy all files to root folder in USB flash drive - Insert USB flash drive to server USB port - Reboot server, system will start BIOS/BMC/FRUSDR update automatically If the unzipped package is not under the root folder of USB flash drive: - Reboot server to EFI shell manually - Run command "map -r" in EFI shell to find the mount point of the USB flash drive - The USB flash drive may mount to fs0: or fs1: or other. - Run command "fs0:" or other to change folder to USB flash drive, - Change folder to the folder storing the firmware package - Run command "startup.nsh" to start firmware update process Please refer to "EFI_Instructions.pdf" in this firmware package for a quick guide to use the EFI commands To Update from Intel(R) Deployment Assistant (IDA) The Intel(R) Deployment Assistant software is easy to use and is present on the "Intel(R) Server Deployment & Management" DVD shipped with the system. User can download the latest version IDA CD ISO image from http://downloadcenter.intel.com/ To use the IDA CD to update the system firmware: - Boot server with IDA CD - Select "Get System Updates" - Choose one of the three options . From http://www.intel.com/support/ Automatically downloads the latest Firmware Update Package from Intel Requires Internet connection Enter your local IP address and proxy configuration Click "Next" to start the download and update process . From my network Download the latest Firmware Update Package from http://downloadcenter.intel.com/ and copy it to a Windows* shared folder Enter your local IP address, the Windows* file server name, and a Windows user name and password Select the firmware package in pop-up window Click "Next" to start the update process . From USB flash drive or Hard Disk Download the latest Firmware Update Package from http://downloadcenter.intel.com/ and copy it to a USB flash drive, then insert the USB flash drive into the server USB port Click "Browse" Select the firmware package in pop-up window Click "Next" to start the update process Note: The Firmware Update Package is in the ZIP file format. Do not unzip before copying to a Windows* shared folder or USB flash drive. To update from Windows* and Linux* or operating systems using the Intel(R) One Boot Flash Update Utility (OFU) Intel(R) One boot Flash Update utility can be downloaded from http://downloadcenter.intel.com/ and it is part of the "BIOS, Firmware Update & Configuration Utilities" for Windows* and Linux*. Please refer to Intel OFU user guide about the details of installation and usage of OFU. Use OFU to update system firmware by the following steps: - Install OFU on Windows* or Linux* system - Download the latest firmware update package from http://downloadcenter.intel.com/ - Unzip package to a folder - Run the following command in Windows* command line/Linux* terminal window: :\flashupdt -u \flashupdt.cfg To update from Windows* Preboot Execution Environment (WinPE) The System Firmware Update Package can be inserted to Windows* PE customized image for creating a bootable Windows* PE CD. User is able to update system firmware from customized WinPE CD by the following steps: - Boot server with customized WinPE CD - Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization) Note: 1. The Intel(R) OFU utility is case sensitive. Therefore, when you transfer the Firmware Update Package using USB flash drive from a Microsoft Windows* system to a Linux environment, you must first extract under the Linux* environment. Otherwise, you will need to mount the USB flash drive manually with 'vfat' option under Linux to avoid conversion from upper case to lower case and vice versa. 2. To make Intel(R) OFU utility run properly under x86 or x64 OS, you have to read OFU release notes on known issues for OFU installation. 3. In this SFUP package, Intel only provide batch file "WinPE_x86_Update.bat" for WinPE2.0 32 bit solution "WinPE_x64_Update.bat" for WinPE2.1/3.0 64 bit solution as an example. Please refer to white paper "White Paper-Intel Server Utilities Procedure for WinPE.pdf" for details on building your own customized WinPE CD. 4. Windows PE 2.0 - built from Windows Vista SP1 32bit or EM64T 5. Windows PE 2.1 - built from Windows Vista SP1 or Windows Server 2008, EM64T 6. Windows PE 3.1 - built from Windows Server 2008R2, EM64T 7. Microsoft IPMI driver is loaded by default from WinPE CD, if you want to use Intel IPMI driver instead of MS IPMI driver for firmware update, you can un-install Microsoft IPMI driver by: Devicesetup.exe ¨Cv remove *IPI0001 Note: IPI0001 is the device ID for Microsoft IPMI driver. ================================================================================ BIOS changes in release 01.02.0003 ================================================================================ - Fixed: NIC1 and NIC2 cannot be disabled in BIOS setup. - Fixed: Legacy VGA on CPU socket one is greyed out when add-in VGA card is associated with CPU socket 2. - Fixed: Serial over LAN cannot be activated via IPMI with Console Redirection enabled in BIOS setup. - Fixed: PXE OPRom inoperative. - Fixed: ISCSI option missing on some platforms. - Fixed: Implementation of "Iflash32 -rd" to load defaults on next system reset. - Fixed: The DIMM fault LED behaves incorrectly on DIMM_D3 under memory Sparing mode. - Fixed: Some Intel(R) NIC IO modules can't be detected under Microsoft* Windows* 2008, SP2. - Fixed: The information for Onboard NICs is shown incorrectly in BIOS setup. - Fixed: RAID RSTe OpROM fails to launch on AHCI SATA ports in RAID configuration. - Fixed: There is no "RMM4 IPv6 Enable/Disable" option in BIOS setup. - Fixed: The default value of Lan port PXE will show disabled for Intel(R) NIC I/O module. - Fixed: CPU information is shown incorrectly in SMBIOS table if the user populates different frequency processors. - Fixed: Active Processor Cores cannot be changed in BIOS setup. - Fixed: Turbo boost will be disabled when choosing the balanced performance policy in BIOS setup. - Fixed: Unexpected SEL entries logged after BIOS update. ================================================================================ ME Changes in release 02.01.05.069 ================================================================================ - Fixed: ME FW Health Event with Event Data 2 = 0 (Recovery GPIO forced) will be generated after IPMI command "Force ME Recovery" issuing. - Fixed: ME FW unexpectedly resets when SMLink clock held low for a long period of time - Fixed: Sometimes system stops responding after Power Cycle. ================================================================================ BMC Changes in release 01.04.2896 ================================================================================ - Fixed: Update to PSU FW for 460W CRPS PSU - contains fix to set the SMBALERT interval to 30 seconds. - Fixed: Empty or Unconfigured HDD will continuously report drive faults - There were many spurious drive fault SELs when ESRT2 RAID5 was configured with 3 disks and 1 hotspare or an unconfigured disk. This change, with HSBP FRUSDR package 02, will correct the spurious SEL errors. - Fixed: Firmware stuck if BMC is crashed and then a BMC cold reset is executed 3 times within the next 30 minutes ================================================================================ FRUSDR Changes in release 1.01 ================================================================================ - Updated to 6.2 of the Thermal FSC Spreadsheet - FRUSDR update is not recognizing valid FRU on 1U 4 x 3.5" HSBP - SPS FW Health sensor (ME) SDR had incorrect Sensor Type and Event/Reading Type codes - Fixed a typo in the DIMM Air Velocity OEM record for R1000 chassis ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2012 Intel Corporation. A portion of this firmware is open source code, which falls under the GPL 2.0 license. [END OF RELEASE NOTES]