Intel® Corporation

Intel® Server Chassis SR2200

The products you are looking for are no longer manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future content updates or software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE PRODUCT SUPPORT DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "TERMS OF USE" INFORMATION.

Information on currently available Intel products is available at www.intel.com and/or developer.intel.com


Identify your product
Product Discontinuance Announcement
Intel® will no longer provide interactive support for these products via telephone or e-mail.

Software and drivers
BIOS/Firmware, drivers, and utilities
Visit Download Center for Intel® Server Chassis SR2200

Technical specifications
Technical Product Specifications
Product overview, including descriptions and diagrams of the integrated features.
icon Technical Product Specifications [PDF]

Specification update
An update to the specifications contained in the Technical Product Specification.
icon Specification Update [PDF]

Installation and Use
Beep Code 1-1-1-1, or no video
Install memory in pairs: 1A and 1B, 2A and 2B, or 3A and 3B.

Bracket Kit Installation Guide
icon bracket_kit_guide.pdf

Configuration and Usage of RJ-45 Serial Ports
If the Intel Server Board SCB2 is integrated with either the Intel® Server Chassis SR1200 or Intel® Server Chassis SR2200, a front RJ-45 serial connector is available. This connector is set up to support PC to PC communication only. The purpose for this connector is for quick access to the server management capabilities of the Intel Server Board SCB2 system using a "crash cart" or similar PC running the server management software. This port, if used, will disable the rear serial port until the cable has been removed. For customers needing a converter from RJ-45 to DB-9, an accessory kit including adapters for DCD, DSR and PC to PC communication, the order code for this kit is AXXRJ45DB9.

Flex Bay
The upper right "flex" bay supports either a seventh hard drive or a slim-line Floppy/CD-ROM. The chassis ships with a square blank panel and a smaller plastic filler plug in the flex bay. Save the filler plug for aesthetic reasons. If using the Floppy/CD-ROM module is used, make sure the drive is fully seated. To properly seat the module, move the handle down, place your thumbs just above the indents in the handle on the floppy drive, and push back gently until you feel the drive snap into place.

Power Supply Functionality and Usage
When viewing the chassis from the rear, the power module to the left corresponds to the top power cord connector, and the module to the right corresponds to the bottom power cord connector. If your system is plugged in, but won't power up, double-check your AC power cord to ensure it is in the correct power cord connector.

Product Guides
icon sr2200_PG.PDF

Quick Start Guides
English icon [sr2200_PG.PDF]
Simplified Chinese icon [PG_SCHINESE.PDF]
Spanish icon [PG_SPANISH.PDF]


Rail Kit Installation Guide
icon rail_kit_guide.pdf

System Status LED
icon led.pdf

Compatibility
Tested Cable Management
Jonathan Engineered Solutions, part number MCR-1003, has been tested by Intel to be compatible with the rail kits available.

Tested Hardware and Operating Systems
icon sr2200_SCB2_HWOS.PDF

Tested Rack Cabinets
The Intel® sr2200 Server Board supports up to 4Gb of 3.3v, 133 MHz, PC133-compliant registered ECC SDRAM DIMMs.
icon Server_Rack_Cabinet_Compatibility_Guide_2 4.PDF

Technical advisories
TA 0523: SCSI Backplanes Reposition During Shipment
icon TA_523.PDF

TA 0524: Top Cover Latch Button May Be Damaged If Pushed Down Too Far
icon TA_524.PDF

TA 0632: Incorrect Power Rating Listed on Regulatory Label
icon TA_632.PDF



©Intel Corporation