This release note and the software that accompanies it are copyright (c) 2012, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software. This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation. ========================== Supported RAID Controllers ========================== This download supports Intel(R) RAID controllers using SAS software stack (RS25AB080, RS25SB008, RMS2PB080, RMS25PB040, RMS25CB080, RMS25CB040, RMS25CB080N,MS25PB080N, RS25NB008, RS25DB080, RS2VB080, RS2VB040, RT3WB080, RS2WC040, RS2WC080, RS2SG240, RS2WG160, RMS2MH080, RMS2AF080, RMS2AF040, RS2MB044, RS2BL080, RS2BL080DE, RS2BL040, RS2PI008DE, RS2PI008), please verify that this utility has been tested with the RAID card you have chosen to use by checking the drivers web page for your controller at http://support.intel.com. ================== Component Features ================== After this SMIS VIB file is installed in VMWare ESXi* 5.* , Intel(R) RAID Web Console 2 at client end is able to remotely manage MegaSAS RAID array under VMWare ESXi* 5.*. =================== Package Information =================== Version = 0.32 OS supported = VMWare ESXi* 5.* ========= Attention ========= For more details of installing SMIS, refer to the file "VMware* ESXi 5.0 installation and Intel? RAID Web Console 2 tips and tricks" on http://www.intel.com ================== Known Restrictions ================== This release supports the released esxi* 5.x release build. For other beta build, this release will not go to support. Please make sure your esx5.x is the released build to use this SMIS package. ======================= Contents on the package ======================= The following files are included in this package: Name Description ir3_Vmware_ESXi5_SMIS_v0.32_readme.txt This File vmware-esx-provider-lsiprovider.vib VMware ESXi 5.* SMIS vib file License_v2.pdf License Agreement ========================= Installation Instructions ========================= VMware ESX 5.0 VIB Installation Instructions VMware uses a file package called a VIB (VMware Installation Bundle) as the mechanism for installing or upgrading software packages on an ESX server. The file may be installed directly on an ESX server from the command line, or through the VMware Update Manager (VUM). COMMAND LINE INSTALLATION New Installation ---------------- For new installs, you should perform the following steps: 1. Copy the VIB to the ESX server. Technically, you can place the file anywhere that is accessible to the ESX console shell, but for these instructions, we'll assume the location is in '/tmp'. Here's an example of using the Linux 'scp' utility to copy the file from a local system to an ESX server located at 10.10.10.10: scp vmware-esx-provider-lsiprovider.vib root@10.10.10.10:/tmp 2. Issue the following command (full path to the VIB must be specified): esxcli software vib install -v {VIBFILE} In the example above, this would be: esxcli software vib install -v /tmp/vmware-esx-provider-lsiprovider.vib Note: Depending on the certificate used to sign the VIB, you may need to change the host acceptance level. To do this, use the following command: esxcli software acceptance set --level= Also, depending on the type of VIB being installed, you may have to put ESX into maintenance mode. This can be done through the VI Client, or by adding the '--maintenance-mode' option to the above esxcli command. Upgrade Installation -------------------- The upgrade process is similar to a new install, except the command that should be issued is the following: esxcli software vib upgrade -v {VIBFILE} VUM INSTALLATION The VMware Update Manager (VUM) is a plugin for the Virtual Center Server (vCenter Server). You can use the VUM UI to install a VIB by importing the associated offline bundle package (a ZIP file that contains the VIB and metadata). You can then create an add-on baseline and remediate the host(s) with this baseline. Please see the vCenter Server documentation for more details on VUM. ============ Known Issues ============ N/A ============= Fixes/Updates ============= version 0.32 - Second Release *Third-party trademarks are the property of their respective owners.