This release note and the software that accompanies it are copyright (c) 2012, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software. This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation. ========================== Supported RAID Controllers ========================== This firmware update package supports Intel(R) RAID SAS controller FALSASMP2 without RAID Activation Key AXXRAKSAS2 installed. Please verify that this package has been tested with the controller you have chosen to use by checking the drivers web page for your controller at http://support.intel.com. =================== Package Information =================== Integrated RAID (IR) Firmware Version = 01.27.190 Integrated RAID (IR) BIOS Version = 06.26.00.00 HWRAID Firmware Package = 9.0.1-0041 (FW 1.20.62-0545) ======================= Contents on the package ======================= The following files are included in this zip: Name: Description: FALSASMP2_readme.txt This file MP2\MP2_78C2.FW IR Firmware binary HWRAID\MP2_4mb_v1.20.62-0545.rom HWRAID Firmware binary mptsas.rom IR BIOS binary sasflash.efi EFI-EBC flash update utility v1.18.00 falsasmp2upd.nsh EFI Script file HWRAID\SROMBSASMP2_HWRAID_FW-v1.20.62-0545_readme.txt HWRAID release notes MPTSAS_OpROM_v.6.26.00.00\mptbios.txt IR MPTBIOS release notes ========================== Update instructions: ========================== 1. If present, remove RAID Activation Key AXXRAKSAS2 and RAID DIMM 2. Copy contents of update package to USB flash drive, CD or other bootable media. 3. Boot to EFI Shell and change to the directory where update files are located. 4. Execute the command: falsasmp2upd.nsh 5. Reset system, and verify IR Option ROM comes up during POST with no error messages. (step #4 also updates HWRAID FW) If you wish to upgrade to HWRAID mode, shut down system and insert RAID Activation Key AXXRAKSAS2 and RAID DIMM. *Third-party trademarks are the property of their respective owners.