============================================================================= Intel(R) Server Board Platform Confidence Test Release Notes ============================================================================= Intel Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: April, 2014 TO: Intel(R) server platform customers SUBJECT: Unified EFI Platform Confidence Test x64(PCTx64) ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppels or otherwise, to any intellectual property rights are granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppels or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2015 Intel Corporation. ============================================================================= SET UP OF CD/DVD-ROM DRIVE ============================================================================= Not Supported at this time. ============================================================================= SET UP OF USB FLASH DRIVE ============================================================================= Unzip efi_pctx64_107.zip to root of USB Flash Drive. Insert USB Flash drive and boot the system. BIOS Settings required for PCT, Press to enter Setup. Upon entering BIOS press to load defaults. Change the boot order so EFI Shell is the primary (#1) boot device. Press to save BIOS setup settings and reboot to EFI. Test should start automatically. Pressing during tests will cause test to terminate. It is recommended that after the comprehensive or comprehensive looping test you do a full AC power cycle (remove power from the system) before retesting. The reason for this is to ensure that all controllers are reset and in an expected mode. The network test requires that the server not be plugged into any network. You can connect any network port to another port in the same system with a cross-over cable to test the NIC ports. Using Same PCT USB Flash Drive to test multiple systems. =========================================== If you plan to use the same PCT USB drive to test multiple systems, Boot the system with the USB Flash Drive to start the test in EFI then wait until all the files copied to the RAM drive, and test menu will display automatically, then remove the USB Flash Drive before you start the PCT test. Note: If the USB key removed during or after starting the PCT test will cause the test to fail. ============================================================================ Supported Products ============================================================================ S1400FP S1400SP S2400LP S2600JP S2600WP S2400EP S2400BB S2400SC S2400GP S1600JP S2600GL S2600GZ S2600IP S2600CP S2600CO S2600KI W2600CR S4600LH ============================================================================ Date Released Version ============================================================================ 06/10/2011 1.00 10/14/2011 1.01 10/20/2011 1.02 11/02/2011 1.03 12/19/2011 1.04 04/10/2012 1.05 08/16/2012 1.06 04/11/2014 1.07 ============================================================================= ABOUT THIS RELEASE ============================================================================= V1.07 Updated test module: NIC,RTC,GraphicsX64, HSCTestX64i,PcieX64,PCIX64 V1.06 Updated test module: BMCx64, DriveX64,GraphicsX64, HSCTestX64i, ichxX64, NicX64, ,PcieX64,PCIX64, TX64. Add VPDx64 V1.05 Updated test module: BMCx64, DriveX64, HSCTestX64i, ichxX64, IOHX64, NPTMX64,PcieX64,PCIX64, TX64 Update Copy right to 2012 V1.04 Update for S2600IP/W2600CR/S2600CO/S2600CP product. Update ICHx64 module. Update NICx64 module. Update PCIex64 module. Update SUPERIOx64 module. V1.03 Update for S2600CO product. Update BMCx64 module. Update RCTx64 module. V1.02 Update for S2600IP/W2600CR product. Update USBx64 module. V1.01 Update for S2600GL product. Updated to recently released modules. v1.00 - Initial release to support Romley Beta Resource CD. System requirements: USB/PS2 Keyboard EFI Shell must be first Boot Option Known Issue: - Please use USB flash drive to run PCT, the test will run direct from USB flash drive. UEFIx64 CD image is not available at this time. - The Comprehensive test and Comprehensive test with looping takes ~1 hour to configure. =============================================================================