================================================================================ Intel(R) Server Board S2600JF, Intel(R) Server System H2000JF Product Family Firmware Update Package for Intel(R) Deployment Assistant, Intel(R) One Boot Flash Update Utility, The embedded EFI Shell, Windows* Preboot Execution Environment ================================================================================ Intel Product Collaboration and Systems Division Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : January 27, 2014 TO : Intel(R) Server Board S2600JF Family Intel(R) Server System H2000JF Family customers SUBJECT : Release Notes for System Firmware Update Package ================================================================================ ABOUT THIS RELEASE ================================================================================ BIOS : 02.02.0002 ME : 02.01.07.238 BMC : 01.20.5446 FRUSDR : 1.12 ================================================================================ Support Platforms and Dependency ================================================================================ Processors supported: Intel(R) Xeon processor E5-2600 series Microcode update versions: Intel(R) Xeon processor E5-4600/2600/2400 series C0 stepping: 0x80000513 CPUID = 0x206D5 Intel(R) Xeon processor E5-4600/2600/2400 series C1 stepping: 0x80000619 CPUID = 0x206D6 Intel(R) Xeon processor E5-4600/2600/2400 series C2 stepping: 0x8000070D CPUID = 0x206D7 Intel(R) Xeon processor E5-4600/2600/2400 v2 series pre-production C0 stepping: 0x405 CPUID = 0x306e4 Production boards: Product Fab Version S2600JF Fab3 or above The following update process must be followed to ensure a trouble free update. 1. BMC firmware 2. BIOS 3. Manageability Engine (ME) firmware 4. FRUSDR ================================================================================ System Firmware Update Package Usage instructions ================================================================================ This package can be updated using one of the following methods: - The embedded UEFI shell - Intel(R) Deployment Assistant - Windows* or Linux* operating system using Intel(R) One-boot Flash Update (OFU) V11.0 Build 15 or later) - Windows* Preboot Execution Environment (WinPE) To update from the embedded EFI Shell Update system firmware from Intel server EFI shell by the following steps: - Download Intel server system firmware update package from http://downloadcenter.intel.com/ - Unzip package and copy all files to root folder in USB flash drive - Insert USB flash drive to server USB port - Reboot server, system will start BIOS/BMC/FRUSDR update automatically If the unzipped package is not under the root folder of USB flash drive: - Reboot server to EFI shell manually - Run command "map -r" in EFI shell to find the mount point of the USB flash drive - The USB flash drive may mount to fs0: or fs1: or other. - Run command "fs0:" or other to change folder to USB flash drive, - Change folder to the folder storing the firmware package - Run command "startup.nsh" to start firmware update process Please refer to "EFI_Instructions.pdf" in this firmware package for a quick guide to use the EFI commands To Update from Intel(R) Deployment Assistant (IDA) The Intel(R) Deployment Assistant software is easy to use and is present on the "Intel(R) Server Deployment & Management" DVD shipped with the system. User can download the latest version IDA CD ISO image from http://downloadcenter.intel.com/ To use the IDA CD to update the system firmware: - Boot server with IDA CD - Select "Get System Updates" - Choose one of the three options . From http://www.intel.com/support/ Automatically downloads the latest Firmware Update Package from Intel Requires Internet connection Enter your local IP address and proxy configuration Click "Next" to start the download and update process . From my network Download the latest Firmware Update Package from http://downloadcenter.intel.com/ and copy it to a Windows* shared folder Enter your local IP address, the Windows* file server name, and a Windows user name and password Select the firmware package in pop-up window Click "Next" to start the update process . From USB flash drive or Hard Disk Download the latest Firmware Update Package from http://downloadcenter.intel.com/ and copy it to a USB flash drive, then insert the USB flash drive into the server USB port Click "Browse" Select the firmware package in pop-up window Click "Next" to start the update process Note: The Firmware Update Package is in the ZIP file format. Do not unzip before copying to a Windows* shared folder or USB flash drive. To update from Windows* and Linux* or operating systems using the Intel(R) One Boot Flash Update Utility (OFU) Intel(R) One boot Flash Update utility can be downloaded from http://downloadcenter.intel.com/ and it is part of the "BIOS, Firmware Update & Configuration Utilities" for Windows* and Linux*. Please refer to Intel OFU user guide about the details of installation and usage of OFU. Use OFU to update system firmware by the following steps: - Install OFU on Windows* or Linux* system - Download the latest firmware update package from http://downloadcenter.intel.com/ - Unzip package to a folder - Run the following command in Windows* command line/Linux* terminal window: :\flashupdt -u \flashupdt.cfg To update from Windows* Preboot Execution Environment (WinPE) The System Firmware Update Package can be inserted to Windows* PE customized image for creating a bootable Windows* PE CD. User is able to update system firmware from customized WinPE CD by the following steps: - Boot server with customized WinPE CD - Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization) Note: 1. The Intel(R) OFU utility is case sensitive. Therefore, when you transfer the Firmware Update Package using USB flash drive from a Microsoft Windows* system to a Linux environment, you must first extract under the Linux* environment. Otherwise, you will need to mount the USB flash drive manually with 'vfat' option under Linux to avoid conversion from upper case to lower case and vice versa. 2. To make Intel(R) OFU utility run properly under x86 or x64 OS, you have to read OFU release notes on known issues for OFU installation. 3. In this SFUP package, Intel only provide batch file "WinPE_x86_Update.bat" for WinPE2.0 32 bit solution "WinPE_x64_Update.bat" for WinPE2.1/3.0 64 bit solution as an example. Please refer to white paper "White Paper-Intel Server Utilities Procedure for WinPE.pdf" for details on building your own customized WinPE CD. 4. Windows PE 2.0 - built from Windows Vista SP1 32bit or EM64T 5. Windows PE 2.1 - built from Windows Vista SP1 or Windows Server 2008, EM64T 6. Windows PE 3.1 - built from Windows Server 2008R2, EM64T 7. Microsoft IPMI driver is loaded by default from WinPE CD, if you want to use Intel IPMI driver instead of MS IPMI driver for firmware update, you can un-install Microsoft IPMI driver by: Devicesetup.exe ¨Cv remove *IPI0001 Note: IPI0001 is the device ID for Microsoft IPMI driver. ================================================================================= BIOS R02.02.0002 ================================================================================= - Fixed: The system can't power up after restoring the BIOS default value via removing the CMOS battery ================================================================================ Issues fixed in 02.01.07.328 release ================================================================================ - Fixed: Platform is not able to power on properly after being shut down by NM Policy - Fixed: Global platform power consumption reported by NM Statistics in S5 is incorrect - Fixed: OOB (out-of-band) stress test by issuing the wrong username may cause connection to be unavailable - Fixed: Shutdown action can be interrupted by cold reset when volatile NM policy is in use ================================================================================ BMC Changes in release 01.20.5446 ================================================================================ - Fixed: The Embedded Web Console was showing the incorrect version of ME Firmware when the ME was in firmware update mode. - Fixed: Nothing displayed on the Embedded Web Console while logging in with an IPv6 address (stateless ICMPv6 discovery). - Fixed: BMC Embedded Web Console session not maintained with a power cycle - Fixed: System does not maintain BMC web console session during power state change or system reset. - Fixed: The Intel(R) Xeon(R) Phi(TM) Coprocessor adapters numbering is not consistent with riser slot numbering on server board. - Fixed: Embedded Web Console SEL text log not decoding BIOS update versions correctly. - Fixed: No video display in BMC KVM when SUT wakes up from S1 or S3 in Windows* 2012. - Fixed: S2600IP - Intel(R) Xeon(R) Phi(TM) Coprocessor adapter MIC Status 7 shows as Unknown in some configurations. - Fixed: S2600GZ - Intel(R) Xeon(R) Phi(TM) Coprocessor adapter MIC Status Sensor shows "Unknown" when only 1 MIC card exists in system. - Fixed: Cannot set link-local gateway for BMC Network Management Interface using IPv6. - Fixed: [X] Web Console not defaulting to English when another non-English browser is detected. - Fixed: Add Cross Frame Options to prevent cross-frame scripting of Embedded Web Console - Fixed: Browser autocomplete enabled before authentication. - Fixed: SMI Timeout errors not logging IIO Global error registers in Debug Log - Fixed: BMC LAN connection not working after IP address change. - Fixed: Multi-node boards with node ID 1111 are not regarded as a single node. - Fixed: BMC email alerts refused by some servers. - Fixed: IP address of baseboard management NIC can't be configured successfully when dynamic and static IP changed. - Fixed: The baseboard management NIC can't get a dynamic IP address when the VLAN set as enable. - Fixed: Change to 1600W PSU firmware for an acoustic issue. - Fixed: POST Error code 0xA6A0 was causing the SEL page to fail to render. - Also fixes decode of POST Error code 0x0012 and invalid POST Errors causing the SEL page to fail to render. - Fixed: The ME firmware has 2 minor versions in the update related SEL. Updated the OEM command format to support this. - Added: Support Intel(R) Xeon(R) Phi(TM) Coprocessor adapters in Intel(R) Server Boards and Systems. - Added: Added a button on Web to enable/disable IPMI over LAN. ================================================================================ FRUSDR Changes in release 1.11 ================================================================================ - Upgrade FRUSDR utility to Version11 Build20 ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2014 Intel Corporation. A portion of this firmware is open source code, which falls under the GPL 2.0 license. [END OF RELEASE NOTES]