This release note and the software that accompanies it are copyright (c) 2014, Intel Corporation or its suppliers, and may only be installed and used in accordance with the license that accompanies the software. This Software is furnished under license and may only be used or copied in accordance with the terms of that license. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. The Software is subject to change without notice, and should not be construed as a commitment by Intel Corporation or its suppliers to market, license, sell or support any product or technology. Unless otherwise provided for in the license under which this Software is provided, the Software is provided AS IS, with no warranties of any kind, express or implied. Except as expressly permitted by the Software license, neither Intel Corporation nor its suppliers assumes any responsibility or liability for any errors or inaccuracies that may appear herein. Except as expressly permitted by the Software license, no part of the Software may be reproduced, stored in a retrieval system, transmitted in any form, or distributed by any means without the express written consent of Intel Corporation. ========================== Supported RAID Controllers ========================== This download supports Intel(R) RAID controllers using MegaRAID SAS software stack (RS3SC008, RS3MC044, RS3DC080), please verify that this utility has been tested with the RAID card you have chosen to use by checking the drivers web page for your controller at http://www.intel.com/support/. =================== Package Information =================== Flash package = v26.0.0-0056 ========== Attention! ========== Intel recommends to loading Factory Default setting after the firmware upgrade which will not affect data on any existing array. To do so: 1. Reboot the system and login to the RAID BIOS Console. 2. Select the controller and select 'Adapter Properties'->'Next' 3. Set the 'Set Factory Defaults' setting to 'Yes' and submit the change. 4. Reboot the system (the default settings are applied). 5. Re-configure to the desired settings in RAID Web Console2. ================== Known Restrictions ================== 1) This download does NOT support EFI v1.1 environment. Please use the EFI shell commander which will display the EFI version, to identify the EFI version. 2) When 2 or more VDs are created, VD cache settings must be the same. ======================= Contents on the package ======================= The following files are included in this zip: Name: Description: COPYING.NEWLIB.txt License Agreement 3108-HADAS_FWPKG-v26.0.0-0056_readme.txt This file 3108s20.rom Firmware binary License_v2.pdf License Agreement update.nsh UEFI firmware update batch file StorCLI\* StorCLI command line utilities (See the StorCLI release notes file for details regarding StorCLI) ========================== Installation instructions: ========================== UEFI shell instructions for updating RAID Firmware: ----------------- 1. Download and extract all files to a USB flash drive. 2. Boot the target system to EFI shell. 3. Change directory to the local drive and directory containing the flash update files and the firmware image file. 4. Type "update.nsh" and press to execute the command 5. Wait for the flash to complete. Do NOT reboot the system during the update. You can also use RAID Web Console 2 or OS version of StorCLI to update the RAID firmware. For more detail, please refer to the Intel(R) RAID Software User's Guide. ==================== Product Limitations: ==================== 1.SATA drives are not supported 2.SAS drives which do not support SCSI-3 persistent reservation 3.T10/DIF functionality is not supported 4.Dimmer Switch functionality is not supported 5.FDE/SED drives are not support 6.SPGIO sideband signal for enclosure management is not supported 7.Only supports SAS SSD for Cachecade volumes 8.Supports Cachecade 1.0 only 9.4K Native and 512e HDD Sector HDDs are not supported 10.System/JBOD mode PDs are not supported 11.Drives that are direct-attached to the controller (not via expander device) is not supported 12.Cluster-Active Reconstruction operations (RAID Level Migration or Online Capacity Expansion) is not supported 13.Patrol Read operations that are in progress do not resume after failover 14.Virtual drive erase does not resume after failover 15.Full VD initialization does not resume after failover 16.Firmware-level node incompatibility details are not reported for non-premium features 17.Split-Brain detection logic can cause IO stop during slow failover (double fault) scenarios 18.maintainPdFailHistory is set to disabled/OFF mode by default. Workaround: In order to enable maintainPDFailHistory functionality, both nodes of cluster must be in the pre-boot environment and the setting enabled via pre-boot utility (WebBIOS). 19.Cannot update enclosure/ESM firmware with an active HA cluster (SCGCQ00413571). Workaround: Shutdown one node for the duration of the ESM firmware update process. Once the update has been completed, the previously shutdown node may be returned to an operational state. =========== Known Bugs: =========== 1.SCGCQ00451214 - Continue with the rebuild even after it loses the reservation results in the ddfPd.c (montask) 2.SCGCQ00497037 - Both SAS cables pulled from one node while IOs running in Linux caused all IOs to stop after LDs failed over to peer node -Workaround: Restart IO from client (surviving peer node will service IO) 3.SCGCQ00496951 - Hit IO stop on SQLStress test when pulling out power cord on each node -Workaround: See IO stop solution steps in Table 4 of Section 5.4 of the Syncro CS Solution User Guide ============================= Package Details/Fixes/Updates ============================= Package 26.0.0-0056 - Initial release (HA-DAS 2.0) Firmware - 4.300.00-3867 FCODE - 4.15.06.00 UEFI_Driver - 0x06040900 (SIGNED) Hii - 04.01.10.00 (SIGNED w/correct Size) BIOS - 6.15.08.0 Ctrl-H - 5.02-0004 NVDATA - 3.1409.00-0008 BootBlock - 3.02.00.00-0001 ROMENV - 1.09 *Third-party trademarks are the property of their respective owners.