================================================================================ Intel(R) Server Board S2600CP Family Intel(R) Server System P4000CP Family Firmware Update Package for Intel(R) One Boot Flash Update Utility and Windows* Preboot Execution Environment ================================================================================ Intel(R) Server Boards and Systems Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : February, 8 2016 TO : Intel(R) Server Board S2600CP Family Intel(R) Server System P4000CP Family customers SUBJECT : Release Notes for System Firmware Update Package ================================================================================ ABOUT THIS RELEASE ================================================================================ BIOS : 02.06.0002 ME : 02.01.07.328 BMC : 01.25.9398 FRUSDR : 1.11 ================================================================================ Support Platforms and Dependency ================================================================================ Processors supported: Intel(R) Xeon processor E5-4600/2600/2400 series Intel(R) Xeon processor E5-4600/2600/2400 v2 series Microcode update versions: Intel(R) Xeon processor E5-4600/2600/2400 series C0 stepping: 0x00000513 CPUID = 0x206D5 Intel(R) Xeon processor E5-4600/2600/2400 series C1 stepping: 0x00000619 CPUID = 0x206D6 Intel(R) Xeon processor E5-4600/2600/2400 series C2 stepping: 0x00000710 CPUID = 0x206D7 Intel(R) Xeon processor E5-4600/2600/2400 v2 series C0/C1 stepping: 0x00000428 CPUID = 0x306e4 Production boards: Product Fab Version S2600CP Fab5 or above The following update process must be followed to ensure a trouble free update. 1. BMC firmware 2. BIOS 3. Manageability Engine (ME) firmware 4. FRUSDR ================================================================================ System Firmware Update Package Usage instructions ================================================================================ This package can be updated using one of the following methods: - Windows* or Linux* operating system using Intel(R) One-boot Flash Update (OFU) V11.0 Build 15 or later) - Windows* Preboot Execution Environment (WinPE) To update from Windows* and Linux* or operating systems using the Intel(R) One Boot Flash Update Utility (OFU) Intel(R) One boot Flash Update utility can be downloaded from http://downloadcenter.intel.com/ and it is part of the "BIOS, Firmware Update & Configuration Utilities" for Windows* and Linux*. Please refer to Intel OFU user guide about the details of installation and usage of OFU. Use OFU to update system firmware by the following steps: - Install OFU on Windows* or Linux* system - Download the latest firmware update package from http://downloadcenter.intel.com/ - Unzip package to a folder - Run the following command in Windows* command line/Linux* terminal window: :\flashupdt -u \flashupdt.cfg To update from Windows* Preboot Execution Environment (WinPE) The System Firmware Update Package can be inserted to Windows* PE customized image for creating a bootable Windows* PE CD. User is able to update system firmware from customized WinPE CD by the following steps: - Boot server with customized WinPE CD - Run script "WinPE21_x64_Update.bat" or "WinPE20_x86_Update.bat" (name may be varied depends on your own customization) Note: 1. The Intel(R) OFU utility is case sensitive. Therefore, when you transfer the Firmware Update Package using USB flash drive from a Microsoft Windows* system to a Linux environment, you must first extract under the Linux* environment. Otherwise, you will need to mount the USB flash drive manually with 'vfat' option under Linux to avoid conversion from upper case to lower case and vice versa. 2. To make Intel(R) OFU utility run properly under x86 or x64 OS, you have to read OFU release notes on known issues for OFU installation. 3. In this SFUP package, Intel only provide batch file "WinPE_x86_Update.bat" for WinPE2.0 32 bit solution "WinPE_x64_Update.bat" for WinPE2.1/3.0 64 bit solution as an example. Please refer to white paper "White Paper-Intel Server Utilities Procedure for WinPE.pdf" for details on building your own customized WinPE CD. 4. Windows PE 2.0 - built from Windows Vista SP1 32bit or EM64T 5. Windows PE 2.1 - built from Windows Vista SP1 or Windows Server 2008, EM64T 6. Windows PE 3.1 - built from Windows Server 2008R2, EM64T 7. Microsoft IPMI driver is loaded by default from WinPE CD, if you want to use Intel IPMI driver instead of MS IPMI driver for firmware update, you can un-install Microsoft IPMI driver by: Devicesetup.exe ¨Cv remove *IPI0001 Note: IPI0001 is the device ID for Microsoft IPMI driver. ================================================================================= BIOS R02.06.0002 ================================================================================= - Fixed: The EFI script “Variable_reclaim.nsh” cannot complete successful and the BIOS Error Manager screen will show "A0A8" memory update failure error. - Fixed: POST screen and BIOS setup screen will shows different BIOS version under recovery mode. - Fixed: Removable RAID Controller . - Fixed: Change Boot Order with SYSCFG in S2600CO2 - Fixed: "Melock" fix. - Fixed: (X) BIOS 2.04 help screen text typos. - Fixed: Security issue. - Fixed: The link speed of RS3WC080 storage card only report to Gen2 on BIOS R02.04.0002 with SNB CPU. - Fixed: UEFI Optimized Boot acknowledges F2 Setup to start, but boots Windows instead. ================================================================================ ME 2.01.07.328 ================================================================================ - Fixed: Platform is not able to power on properly after being shut down by NM Policy - Fixed: Global platform power consumption reported by NM Statistics in S5 is incorrect - Fixed: OOB (out-of-band) stress test by issuing the wrong username may cause connection to be unavailable - Fixed: Shutdown action can be interrupted by cold reset when volatile NM policy is in use =============================================================================== BMC 01.25.9398 =============================================================================== - BMC change to ensure the system remains off after an over current event until the system has been AC power cycled - Add a new support for only TLS1.2 protocol(both for stunnel and openssl). - Disable stunnel for ihc - The www sectionas location is changed from 00c00000 to 00c20000. - Update openssl to 1.0.2d. ================================================================================ FRUSDR 1.11 ================================================================================ - None. ============================================================================= LEGAL INFORMATION ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2016 Intel Corporation. A portion of this firmware is open source code, which falls under the GPL 2.0 license. [END OF RELEASE NOTES]