================================================================================ Intel(R) Server Platform BIOS Release Notes ================================================================================ INTEL(R) Server Boards and Systems Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ================================================================================ DATE : Jan 30, 2019 TO : Multi-Core Intel(R) Xeon(R) Processor-Based Server Platform customers SUBJECT : BIOS Release notes for version 03.01.0042 ================================================================================ LEGAL INFORMATION ================================================================================ Information in this document is provided in connection with Intel Products and for the purpose of supporting Intel developed server boards and systems. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (C) 2019 Intel Corporation. ================================================================================ ABOUT THIS RELEASE ================================================================================ Build Stamp : S1200SP.86B.03.01.0042 Build Date : Jan 30, 2019 ================================================================================ Supported Platform ================================================================================ S1200SP Family ================================================================================ IMPORTANT: PLEASE READ ================================================================================ Due to additional integrated BIOS features, the Intel(r) Server Board S1200SP BIOS binary regions have surpassed their original design sizes. Install bridge BIOS version 03.01.2032 to redefine the binary regions before attempting to update the BIOS firmware to version 03.01.0038 or later. Prior to update your system to BIOS version 03.01.0038 or later, is required to update the system to bridge BIOS version 03.01.2032. If you update BIOS version from 03.01.0038 over to 03.01.0042, the bridge BIOS version is not required. System will fail to update the BIOS FW to version 03.01.0042 if the currently BIOS FW installed on the system is not 03.01.2032 or 03.01.0038. We apologize for the inconvenience. ================================================================================ CRC32 VALUE ================================================================================ R03.01.0042_S1200SPLC.bin : 0xEF078B25 R03.01.0042_S1200SPRO.bin : 0xEE078B23 R03.01.0042_S1200SPSE.bin : 0x77D70A8D ================================================================================ BIOS COMPONENTS/CONTENTS ================================================================================ Processors supported: E3-1200v5/E3-1200v6 UP Processor Microcode update versions: CPUID Version Status 0x506E3 000000C6 (E3-1200v5 UP R0/S0) 0x906E9 0000008E (E3-1200v6 B0) On-Board Component Option ROM Versions: all_gigabit_pxe_vxx.LOM - 1G PXE OpROM v1.5.53 (for all EPSD gigabit controllers, including LOMs and I/O modules) all_iscsi_vxx.LOM - iSCSI Boot OpROM v3.0.34(for all EPSD gigabit and 10G EPSD controllers, including LOMs and I/O modules) AHCIOR.BIN - sata AHCI Oprom Vbt.bin - iGFX graphic UEFI driver VBT file, VBT version 193 MATROXVIDEOOPROM.BIN - Onbaord VGA legacy Oprom v3.8SQ ACM : V0.8 RSTe SATA Legacy OPROM : V4.3.0.1018 RSTe SATA EFI OPROM : V4.3.0.1018 ESRTII Legacy OPROM : A.15.08211538I ESRTII EFI OPROM : 04050000 1G NIC Legacy PXE OPROM: V1.5.53.1 1G NIC EFI PXE OPROM : V5.4.19 iSCSI OPROM : V3.0.34 iBMC Matrox G200 VGA : V3.8SQ iGFX Legacy : 9.0.1027 iGFX UEFI Driver : 9.0.1033 RC Version : V4.1.0.6 Security Revision : 07.00 Management Engine Firmware Version : v04.01.04.054 ================================================================================ INSTALLATION NOTES ================================================================================ WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system. User can update BIOS flash image via the next method... UEFI iFlash32 1. Copy the entire contents of the zip file to the root of a USB flash drive 2. Boot to uEFI Shell, then change the Shell to the mapped device (USB flash drive) Example: Shell> fs0: (or fs1:) 3. Run updateBIOS.nsh, updateME.nsh, updateFD.nsh and reset the system after each region upgrade 4. Reboot the system after the last upgrade is completed 5. Do *NOT* interrupt the BIOS POST during the first and second boot ================================================================================ BIOS RECOVERY INSTRUCTIONS ================================================================================ The Recovery process can be initiated by setting the recovery jumper (called BIOS Recovery Boot Jumper) Details regarding the jumper ID and location can be obtained from the Board TPS. BIOS starts the recovery process by first loading and booting to the recovery image from backup BIOS region. This process takes place before any video or console is available. Once the system boots to the recovery image use the following steps to perform the BIOS recovery: 1. The BIOS POST screen will appear displaying the progress and it automatically boots to the uEFI SHELL 2. Follow any of the next two methods for recovery process. Note: Recover mode will clean up all user previous changed BIOS settings including ITK saved settings BIOS update under recovery mode as below two methods: The USB flash drive is necessary for the primary BIOS upgrade and must contain the following files under its root directory: 1. uEFI iFlash32.efi (including iflash32_temp.efi and ipmi.efi ) 2. *.CAP( the released BIOS capsule which version you expect to update) 3. UpdBIOS.nsh (update accordingly to use proper *.CAP file) A Method: Install USB media after recovery boot to shell, you need to follow below steps 1. Under Shell, type "map -r" to map all disc 2. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 3. Execute the UpdBIOS.nsh script for BIOS update, wait for BIOS update complete 4. Power OFF the system, and revert the recovery jumper position to "normal operation". 5. Power ON the system. 6. Do *NOT* interrupt the BIOS POST during the first boot. B Method: Install USB media prior to recovery boot It will boot automatically into EFI Shell to invoke the Startup.nsh script and start the flash update application. IFlash32.efi requires the supporting BIOS Capsule image file (*.CAP). After the update is complete, there will be a message displayed stating that the "BIOS has been updated successfully" indicating the recovery process is finished. The user should then power off the system and revert the recovery jumper back to normal operation and restart the system by performing a power cycle. Note: The Startup.nsh file includes parameters to upgrade not only the BIOS, but the ME, FD, BMC and FRUSDR ================================================================================ ME FW Capsule INSTALLATION NOTES ================================================================================ A. UEFI iFlash32 1. Boot the system to EFI Shell 2. Copy IFlash32.efi and ME.CAP and FD.CAP file to a HD or USB Flash Drive 3. Map the respective storage device in system with the command Shell> map -r 4. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:) 5. Run the IFlash32 utility on the prompt fs0:\> IFlash32 ME.CAP /u /ni fs0:\> IFlash32 FD.CAP /u /ni 6. AC cycle the system after the update is completed. ================================================================================ IMPORTANT NOTICE ================================================================================ D01.03.0008 - This BIOS has included CCB108 implementation(Aperture size), suggesting to press F9 to load default if BIOS is updated via online method. D02.01.0030 - This BIOS has Microcode support for E3-1200v6 A0/E3-1200v6 B0 CPU and remove the Microcode for E3-1200v5 CPU due to the space limitation. D02.01.0034 - This BIOS has Microcode support for E3-1200v5 CPU/E3-1200v6 A0 CPU and remove the Microcode for E3-1200v6 B0 due to the space limitation. D02.01.0036 - This BIOS has Microcode support for E3-1200v5 CPU/E3-1200v6 B0 CPU and remove the Microcode for E3-1200v6 A0 due to the space limitation. D02.01.0037 - This BIOS has SMM communication buffer fix with Security Revision updated to 01.01 following SPRD requirement. Two impacts should be noted: >> 1. Security Revision upgrade: causing BIOS can't be downgraded to previous version with Security Revision 01.00 under normal mode. No impact under Recovery Mode. >> 2. SMM communication buffer fix: causing older version of utilities are not functional, only version equal or newer than below ones can be used together with this new BIOS. Sysinfo V14.0 Build 18, Selviewer V14.0 Build 17, Syscfg V14.0 Build 15, iFlash32 v14.0 Build10, FWPIAUPD v14.0 Build 8, FRUSDR v14.0 Build 8, OFU v14.0 Build 13 D03.01.0017 - This BIOS has updated Security Revision to 02.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01) under normal mode. No impact under Recovery Mode. D03.01.0018 - When online update ITK customized BIOS from orginal BIOS version older than 03.01.0017 to version newer than(or equal) 03.01.0017, it is required to flash the cusmtoized BIOS twice, otherwise the cusmtoized BIOS settings will not take effect as expected limitation due to the fix 'system couldn’t preserve ITK setting after flash a non-modified capsule'. If the original BIOS version is newer than(or equal)03.01.0017, there is no such requirement when online update customized BIOS. D03.01.0025 - This BIOS has updated Security Revision to 03.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01&02.00) under normal mode. No impact under Recovery Mode. R03.01.1028 - This BIOS has updated Security Revision to 04.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01&02.00&03.00) under normal mode. No impact under Recovery Mode. D03.01.0033 - This BIOS has updated Security Revision to 05.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01&02.00&03.00&04.00) under normal mode. !!!!Highlight!!!! Please update to version 03.01.2032 firstly before updating to 03.01.0033, otherwise BIOS capsule file can't be recognized! Please update Primary and Recovery region together due to flash map changing, and don't allow to downgrade to previous version. D03.01.0036 - This BIOS has updated Security Revision to 06.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01&02.00&03.00&04.00&05.00) under normal mode. !!!!Highlight!!!! Please update to version 03.01.2032 firstly before updating to 03.01.0036, otherwise BIOS capsule file can't be recognized! Please update Primary and Recovery region together due to flash map changing, and don't allow to downgrade to previous version. D03.01.0040 - This BIOS has updated Security Revision to 07.00, causing BIOS can't be downgraded to previous BIOS version with low Security Revision(01.00&01.01&02.00&03.00&04.00&05.00&06.00) under normal mode. ================================================================================ KNOWN ISSUES/WORKAROUND ================================================================================ ================================================================================ CHANGE LIST ================================================================================ 03.01.R0042 ================================================================================ Production Sign [HSD-ES][1507017816]PSIRT - FW-UEFI-Vuln-2018-038 BIOS does not set TCO_BASE_LOCK [HSD-ES][1507017816]PSIRT - FW-UEFI-Vuln-2018-038 BIOS does not set TCO_BASE_LOCK [HSD-ES][2103624154]Boot into ESXi6.7u1 after enable "VT for Directed I/O", system would hang with purple srcreen. [HSD-ES][1506299498]Lack of ACPI IPMC HID IPI0001 Device causes standard IPMI driver can't be automatically loaded in OS [HSD-ES][1506741607]FW-UEFI-Vuln-2018-031 - Dynamic loops accessing one element beyond boundary due to <= operator Update Security version to 7 ================================================================================ 03.01.R0038 ================================================================================ Production Sign Update Microcode version for E3-1200v5 - 0xC6 / E3-1200v6 - 0x8E [HSD-ES][2103622470][S1200SP]when flash ME from 04.01.04.054 to 04.01.04.054 with BIOS D03.01.0036?the sel showed wrong information as “ME update started with version 00.00.00.001” [HSD-ES][2007342091][S1200SP] S1200SPL hangs with cursor on the screen when USB flashdrive is connected and specific BIOS settings are configured [HSD-ES][1504788221] Clone from 2202707955 PSIRT-BIOS-2018-008 Additional protection for DCI enable Sync up PSIRT-BIOS-2018-002 changes from S1200SP CRB sync up the fixes for warning message“WARNING: MBAR not programmed, using default 0x00000000FEDB0000” Fix the ME cannot be online update issue after sync PSIRT-BIOS-2018-002 changes Update Security version to 6 Update Security version to 5 [S1200SPSGXRefresh] Adjust the BIOS flash map to fix the code size issue during compiling ---- Part2--IncreaseMicrocodeFvSize Update Microcode version for SKX to 0xC2 !!!!Highlight!!!! Please update to version 03.01.2032 firstly before updating to 03.01.0038 otherwise BIOS capsule file can't be recognized! ================================================================================ 03.01.R2032(!!!Hightlight!!! Used for intermedia version to update to version equal or larger than 03.01.0038) ================================================================================ CCB#2227: Add Infineon FW update capability support in BIOS and UEFI application Roll back the Microcode version for E3-1200v6to 0x84 [S1200SPSGXRefresh] Adjust the BIOS flash map to fix the code size issue during compiling ---- Part1--AutoDetectSecPeiFv Fix the setup variable structure change issue Add warning message during BIOS POST to inform customer to update this bridge BIOS to production version. Update Microcode version for E3-1200v6 - 0x8E ================================================================================ 03.01.R1029 (Point release for security fix to E3-1200v6 CPU) ================================================================================ Update copyright to 2018 Update Microcode version for E3-1200v6 - 0x84 ================================================================================ 03.01.R1028 (Point release for security fix to E3-1200v6 CPU) ================================================================================ Update Security Revision to 04.00 Update Microcode version for E3-1200v6 - 0x7C BIOS sign with Production key [HSD-ES]2006683738:System S1304SPOSHBNR is not booting while an USB sensor device called Go! Temp is connected to the server. Update Microcode version for E3-1200v5 - 0xC2 / E3-1200v6 - 0x70 [HSD-ES]2103619082:“Assert NMI on PERR” active and not grey out when change the “Assert NMI on SERR” to disable. [HSD-ES]1504600874:Some variables cannot load default when it was deleted after SUT reset. [HSD-ES]2103619432:Core cannot be disabled via node manager IPMI. ================================================================================ 03.01.R0026 ================================================================================ Re-sign BIOS package with production key. Update ME to version v04.01.04.054. [HSD-ES]2103618356: The "System Boot Timeout" counting not show when set the "Power on Password" to Enable and "System Boot Timeout" to 30sec, it will directly boot to the 1st boot devices. [HSD-ES]1504574236: Run "hw_seq" module show fail msg "WRSDIS bit is not set!" Update Security version to 03.00. SUT can't flash BIOS with MX flash part. Update ME to version v04.01.03.022 Sync code from grantley for 'REACT-2017-1-OpenSSL upgrade for security vulnerability' Update RC code to 4.1.0.6 ================================================================================ 03.01.R0021 ================================================================================ Re-sign BIOS package with production key. [HSD-ES]1504480146:Run chipsec1.2.5r4 has new failed item "FAILED: chipsec.modules.debug_interface". Legacy HDD device still can boot after disable legacy hard disk boot order [HSD-ES][2103616964] UUT will be halt when set IPv6 address/Gateway IPv6 over 32bit [2103616740] When TXT function setup Enabled and SGX setup Software Controlled, System will continuously reboot with TPM2.0. [HSD-ES][2103617252]: When set CPU power and performance to performance, the C1E autpromote option still keep as Enabled. fix build error because of no enough space for PEI driver. [CCB#493] Allow ITK to change to change SMBIOS table OEM Strings (Type 11). Update Microcode version for SKL - 0xBA / KBL - 0x5E. Update RC code to 4.1.0.4. [CCB1890] Add SGX support. ================================================================================ 02.01.R0055 ================================================================================ [CCB#1838] To support ITK/Syscfg to adjust UEFI mode boot order. [Merge][452574]EPSD100036080:"In UEFI ESTE2 RAID Mode, BIOS Setup UI halt at "Drive Management" interface when enter "View Drive Properties"". Disable Host CPU BIOS master write access of GBE region. [Merge][442804]Silverpass refresh SGX team city debug build failure fix Update Copyright to 2017 Update ME to version 04.01.03.021 [Merge][450284] KBL Microcode Update to version 48 [Merge][452874][456000]Update RC to version 4.1.0.1 [Merge][454913][457108]Enable IFWI ID [Merge][450308][450321][Klocwork] Issues found in the package of CpPlatPkg, GreenlowPcPkg, ServerCommonPkg and CpPcRestrictedPkg. [Merge][446513]Sync code (BPE) for the solution of KW issue on Greelown SGX platform. [Merge][445255]Sync code (GreenlowPlatPkg) for the solution of KW issue on Greelown SGX platform [Merge][445266]Sync code (GreenlowPcPkg) for the solution of KW issue on Greelown SGX platform Remove KBL aware msg Add KBL aware msg back. Silverpass Refresh disable ME PSU PDT EPSD100256731: The board hangs up during POST when factorys' serial port loopback cable is connected [Merge][EPSD100031108] Get Yellow-Mark devices in Device Manager when installed Windows 10 OS [Merge][EPSD100256270]-[X] Boot menu page does not disappear when boot to IPv4 device. [Merge][EPSD100035644] at Sever Management page, bottom info show on left-top screen when login to BIOS setup as an User privilege temp remove the KBL aware for PVL test add secure boot production PK Merged [SilverPass] EPSD100254486:System Auto Rebooted during FSUP Bios 01.03.0010 ME 04.00.03.096 BMC 01.03.9805 frusdr 1.19 update under Linux EPSD100256264 - [SVP-KBL]Sysinfo_V14.0.18:BIOS ID shows messy code by reading it with notepad++ or word. [EPSD100035167] Sometimes, it will record "Fan low critical” event after AC power KBL-R Aware BIOS cut in Update MRC to version 3.9.0.5 Update ME to version 04.01.03.019 Microcode Update KBL B0 version 42 legacy USB RT security fix Update MRC to version 3.9.0.4 Update ME to version 04.01.03.017 Fix chipsec security Test failed in SMI 0x26, 0x28 and 0xef(BIOS Security enhancement for SMM communication buffer). Silverpass Refresh MRC update to Beta 3 Version 3.9.0.3 Silverpass refresh cut in SKL + KBL B0 processor EPSD100035028: ME status will show "Recovery" after online update(D01.03.0023->D02.01.0034) (Disable CUPS in ME configuration file EPSD100034949: Fix set active processor cores item is invalid with kabylake B0 CPU Silverpass Refresh microcode remove KBL B0 support, add back SKL support. EPSD100034795:Fix BMC Firmware Version is incorrect in post screen. EPSD100034770: Fix the warnning message is not correct when User passwords are setted same as Administrator password EPSD100034874:Fix user cannot enter correct password at second times when set up with “Caps Lock” key on keyboard under BIOS Setup screen issue. EPSD100254632 [SGX]Chipsec UEFI NVRAM variables protect test fialed Update RC: 3.9.0.1 ME update to 04.01.03.001 Add KBL I3 CPU Graphic support Microcode Update KBL B0 version 3A EPSD100034570: Change ME build ID in BIOS post screen to 3 number wide(xx.xx.xx.xxx). EPSD100034559: SMBIOS type 4 max speed is dynamic changed base on the processor’s max supported speed. EPSD100254183: System Status LED and the value of ED2 in SEL are incorrect when inject Correctable/Uncorrectable Error. EPSD100034285: Fix SUT will hang during installing pGFX driver with Addin VGA card when VGA output from IGD. EPSD100254192: When disable WHEA Support, inject memory CE/UCE at BIOS/OS no any log appear at SELlog. Fix some help strings don't match with BIOS setup spec. disable SDR ME Power State Sensor by BMC's request. Update BIOS and SINIT ACMs to version 0.8. EPSD100034001:Fix some Error Message not mach with EPS. EPSD100034203: ACPI table has extra tables DBGP, BGRT and UEFI, but EPS1.1 defined not support. EPSD100033983: Change ME build ID in BIOS setup to 3 number wide(xx.xx.xx.xxx). Add Microcode patch 0x34 for KBL A0/B0, Remove SKL Microcode temporary. update RC to version 3.8.0.4. Add KBL CPU Class to fix KBL B0 POST hang issue. ME update to version 04.01.03.000. EPSD100254185: Correctable Error Threshold option is no function. Fix some Error Message don't mach with EPS. EPSD100254667 Syscfg cannot enable "static boot order". Add a check which only do boot order check when "static boot order" is enabled by F2 setup. BIOS SPS update for CUPS. Add back SkyLake CPU to support: SKL, KBL A0. Update RC code 3.9.0. [EPSD100033997] In UEFI mode populated TPM1.2 on SUT cannot turn on bitlocker in Win2012R2. [EPSD100254177] No iSCSI 1GbE/10GbE Option ROM item at RO board. Bugfix: TPM20 Bitlocker not working on UEFI Win2012 when PCR5 enable EPSD100033985 Under EFI shell(UEFI mode), static IP can't connect TCP/IP succesfully. EPSD100033987:Some Help strings don't match with BIOS setup spec v1.3. EPSD100254186: Use cmdtool to set auto boot to payload/PXE, at the first time reset SUT it can't auto boot to payload/PXE. SUT boot to payload/PXE at the 2nd time reboot. Merge [CL400795] EPSD100253661_[x]McAfee report the DMI type 41 record bug on Silver Pass RO system-part2. Update SKL Microcode 0x9E. EPSD100254178:FRB2 still has function when set system boot time >6min or when enable power on password. EPSD100254319: Clean up Security issue on Greenlow-R by removing all usages/references to EFI_SMM_RUNTIME_PROTOCOL. EPSD100034023 The value of PCR1 is not change by using pcrdump64_1.2.1.efi to dump log with different DIMM quantity. EPSD100033997: In UEFI mode populated TPM1.2 on SUT cannot turn on bitlocker in Win2012R2. EPSD100254108: Remove AC during flash BIOS then plug-in AC and power on, SUT not auto boot to Error Manager. Enable CUPS in ME configuration file. EPSD100253666: Remove LPIT, WDAT and DBG2 from ACPI table list. [EPSD100033981] Connect TPM2.0,use PCR reading tool to dump PCR0-7 value ,after reboot or shutdown some times, PCR1 value dumped always different. [EPSD100033980] TPM2 table in ACPI information, "Platform class" value is 0, which should be 1(means server). KBL Add Memory Speed Selection 2400MHz EPSD100254111: When set PCIe Slot5 OpROM control option to disabled, PCIe card still has OpROM during POST at LC/SE board. EPSD100254106:When SUT boot to BIOS recovery mode, no "System Firmware Progress sensor 21 reports BIOS recovery start." event log. Initial BIOS version for SilverPass Refresh with Kabylake CPU. Keychange: 1.1 Microcode for Kabylake/Skylake are updated. 1.2 RC code is synced. 1.3 ME is updated. 1.4 BP core is updated. ================================================================================ 01.03.R0023 ================================================================================ Re-sign BIOS package with production key. EPSD100033233 System Status LED and the value of ED2 in SEL are incorrect when inject Correctable/Uncorrectable Error. Update System agent PCIE RC code for tracker EPSD100034123. EPSD100254632 [SGX]Chipsec UEFI NVRAM variables protect test fialed. EPSD100034577: The CPU max speed in SMBIOS type 4 is not 4200MHz. EPSD100034642: BMC version is incorrect on Diagnostic screen. EPSD100034709:Memory Error Injection behavior incorrect. EPSD100254486:System Auto Rebooted during FSUP Bios 01.03.0010 ME 04.00.03.096 BMC 01.03.9805 frusdr 1.19 update under Linux. [Silver Pass][No Sighting] Merge SGX support stream CP_CBT_PCSD_Greenlow_SGX_IPClean change FOR [EPSD100033331] Log as user,"UEFI Option ROM Control" option can be changed in UEFI mode. EPSD100253788 Clone of: At BIOS setup, current Memory speed show 1867Mhz when set memory speed to 1866MHz. EPSD100253789:Clone of Total Width field value is 0x40 in SMBIOS Type 17 log. EPSD100253661_[x]McAfee report the DMI type 41 record bug on Silver Pass RO system. EPSD100031108: Get Yellow-Mark devices in Device Manager when installed Windows 10 OS. EPSD100253790 Clone of: Issue found when checking ACPI dumped log. Merged EPSD100034123:[SGX]PCIe link speed cannot down to Gen2/Gen1 on slot 6 with Gen3 device, cannot down to Gen1 with Gen2 IO Module. [SilverPass]Hide correctable error threshold option in BIOS setup because this function doesn't support on Greenlow platform. [SilverPass]Clean up Security issue on Greenlow by removing all usages/references to EFI_SMM_RUNTIME_PROTOCOL. [SilverPass]Sync to BP 1221.331 to address core security issue defined in PSIRT-TA-201607. EPSD100034413[SGX]Enable Payload,boot manager has UEFI Network option under UEFI mode. EPSD100254667 Syscfg cannot enable "static boot order". Add a check which only do boot order check when "static boot order" is enabled by F2 setup. [S1200SP][EPSD100252071] Set CTV to be 160~170ms as W/A for RMS25JB080, RMS25KB080, RMS25JB040, RMS25KB040. [S1200SP][EPSD100032992] Set 'Platform Class' for server platform and keep PCR1 value consistently when configuration is not changed. [S1200SP][EPSD100033014] Change 'Remote Management Module' present policy dependency from NIC to RMM. [S1200SP][EPSD100032790] Adjust Sever Management page shown when after ITK modified. [S1200SP][No Sighting] SPS ME FW update to 4.0.3.96. [S1200SP][No Sighting] Expose Aperture Size to ITK w/o default value change for CCB108. ================================================================================ 01.03.R0006 ================================================================================ Re-sign BIOS package with production key. SPS ME FW update to 4.0.3.94. Disable CLK_RUN# logic following HW design for EPSD100031770. Update SPS ME to 4.0.3.096. Roll back SPS ME to 4.0.3.075. [EPSD100251676] SE Sku show incorrect SATA information. Roll back to old ESRTII OPROM due to new one can't support 4K HDD. Roll back to remove VS2013 support to adviod side effect that system hang 0x96 with D89 com port connected. Microcode update to 0074. [EPSD100251465] UEFI Production ESRTII Driver 04080000 intergate. SPS ME FW update to 4.0.3.94. WA for system reset will hang at POST code 0x36 due to TCO_STS issue. Microcode update to 0x6A. [EPSD100251369] Some errors reported in selftest7_7.0.22.3774. [EPSD100031058] During WIN2012R2 Cert with SE SKU and SUT show "USB Exposed Port System Test" test item fail. [EPSD100031074] BIOS message display User Name already Exits when type the same user name in User Configuration. Fixed the issue that the time value in RTC register is not valid when CMOS battery is bad because removed for long time. Microcode update to 0x5c. SPS FW update to 4.0.3.89. Bios update progress will always stay on 0% ,if set recovery jumper and a previous version BIOS has been programmed at first. [EPSD100030687] Static Boot Order would not change to Disabled when change boot order via ITK. Enable TPM2.0 Support. Sync CRB BIOS V104_03, RC version is 1.8.0.1. [EPSD100250712] Abnormal SEL of "POST Err Sensor reports Processor 01 disabled" observed after global reset from MFG mode. [EPSD100029833] System couldn't intall Windows 2008 R2 under UEFI mode. [EPSD100029962] In the process of installing win 2008 R2 with RS3WC080, screen will stay at "Starting Windows". [EPSD100250675] Auto-Reboot time is too long with TPM module and MFG jumper attached. Implement clear screen after PXE oprom and before main screen. [EPSD100250586] Abnormal SSB Therm Trip SEL observed on Silver2 build LC boards in EFI shell, MFG mode. Microcode update to 0056. ================================================================================ 01.02.R0001 ================================================================================ Update BIOS version to 01.02.0001 for gold build. Sync Iflash32 code with the latest CP code. Update TXT BIOS ACM with version HF 1.3. [EPSD100030209] SUT will reboot when press ESC under PMC ASR 71605 UEFI oprom. [EPSD100250524] Inappropriate prompt message when only DIMM A1/B1 slot is populated. Microcode update to 0x49_4A. ME status report error if some region is corrupted during ME update. TXT function implement. Fixed RTC debug assert issue. [EPSD100030229] System time is abnormal after Linux OS installation completed. Fixed recovery hang issue and flash issue. SPS ME FW 4.0.3.75 updated. [EPSD100028819] "Submit fail for form:!." box will pop up after some specific steps with RMS3CC080. [EPSD100029971] UUT recorded CATERR in AC/DC/Reset cycling test with varies hang point 0xCC/0xD5/0x55. [EPSD100250133] BIOS Setup Options shows incorrectly with Client S0 CPU. [EPSD100030065] System cannot install Legacy W2012R2 OS in RSTe Mode if the RAID volume has included SATA Port 1, Port 6 and Port 7. [EPSD100029901] System stay long time at RMS25PB080 Legacy UEFI option rom. [EPSD100250171] SSB Therm Trip error will be trigger during system warm reset. [EPSD100029430] System show error message "Unknown opcode 0x18 at table offset 0x04B7" when installed SUSE 12 x64. SPS ME FW 4.0.3.68 updated. S1200SP Klockwork Issue. [EPSD100029964] NO 8300 and 84F4 error info in error manager. [EPSD100250135] There is no screen output when set to DP + Processor graphics with Client CPU QJZW which is 2 + 1 processor. Upgrade ME to be version ME E3_04.00.03.061.0. Set PCH Hot Level to be 98 degree C. 450w PSU PMBus hang issue. check all USB policy and over current pin align with HW. [EPSD100029793] There are three logs recorded ME version change in SEL after online update ME. [EPSD100249379] Chipsec security Test failed. [EPSD100247152] Error message didn't display correctly in Error Manager after clear remove CMOS battery or clear CMOS jumper. Upgrade ME to be version ME E3_04.00.03.056.0. Roll back Chipsec lock register. Latest VBIOS(9.0.1027) /GOP(9.0.1033) to support S stepping pgfx. [EPSD100249773] Update backup BIOS failed with correct command after flash backup BIOS with incorrect command. [EPSD100028816] Processor Graphics Driver "15.40.4146.win64" cannot installed completely in W2012R2 OS with VGA Add-on card connected. It would stop at driver installation [EPSD100029875] [SE sku] Some removed devices list in SMBIOS Type8. update V97_13 PV RC 1.6.0.0 to RC 1.6.0.0.1 Sync CRB bios V97_09 with RC 1.6 [EPSD100029869] There are "USB Exposed Port System test" fail items when running Win2012R2 Cert Test [EPSD100029657] System stay long time at RMS25CB080 Legacy/UEFI option rom. [EPSD100249590] SE board show incorrect PCIe information in BIOS setup. [EPSD100249646] CMOS Date/Time still be cleared on first reboot after clear CMOS or remove CMOS battery. [EPSD100028474] BIOS can't detect IO module 82599 10G UEFI iSCSI. But onboard ROM UEFI ISCS can detect. [EPSD100249731] Production ESRT2 OpROM(A.15.08211538I) and EFI(A.15.08131643I) for inclusion into S1200SP BIOS.Microcode update to 0x3A. [EPSD100248742] No DIMM info. [EPSD100249280] System will hangs up on 0X0C on next boot when interrupt update BIOS in EFI shell. Implement IPMI Command " Set PCIe card presence command". [EPSD100249567] System information show incorrect in BIOS setup. [EPSD100249547] After F9 load default and Press F10 save,system will pop-up warning message and hangs up on BIOS Setup [EPSD100249379] Chipsec security Test failed [EPSD100248742] No DIMM Power info. [EPSD100249552] Extra messages display in remote system Hyperterminal when CR is enabled on Legacy mode. Fixed BMC user help string error. Update ME module to be aligned with FTool_SPS_E3_04.00.03.046.0. New AHCI OPROM replace debug verison AHCI oprom. [EPSD100249525] Error information status is gray and error description can't shown in Error manager. Re-structure code to align other server platform Open one setup item "PciePllSsc" only for ITK tool. Integrate ESRT2 latest release OPROM and EFI driver. [EPSD100028351] There is no black space between "number" and "MB" for value of filed "Effective Memory" in BIOS Setup. [EPSD100249355] System will display error message "An unknown error occurred while running this application" when execute RSTe Utilitie tool under UEFI Win2012R2. [EPSD100249328] Set Admin/User PWD function incorrect and Admin/User PWD status show abnormal at BIOS R021. [EPSD100029073] Memory ECC error injection information is incorrect in both SEL Viewer and system log. Update XML file for SE SKU settings. Update microcode to 0034. Change setup help string according new setup spec Align setup spec 1.0 new secure boot setup help string. Secure Boot Symptoms. [EPSD100248742]FAIL: There is no DIMM power information. Update BIOS flash map. [EPSD100248742] There is no DIMM power information. Support MMIO above 4GB when memory size >= 64GB [EPSD100029653] BIOS flash can't run in Quad mode. Update ME to be version E3_04.00.03.044.0 with enabled SPI Qual mode. [EPSD100247099] There are some errors in SMBIOS log. [EPSD100029655] One more option "Early System Boot Timeout" lists in Advanced Boot Options page. [EPSD100029336] When there is BIOS Recovery log in SEL, it cannot see any log and USB Key will be crashed after executed SELViewer under EFI Shell. [EPSD100249269] Update D111_ME.cap will show "Warning: No SMBIOS entry for KCS address - using fixed value of 0xCA2" [EPSD100029436] Unable to boot to HDD (with UEFI OS) by LCD. [EPSD100242988] Internal:SCT test has below items fail: Runtime Services Test/Console Support Test/Bootable Image Support Test/EFI Byte Code Test/HII Test/ATA Bus Support Test/ISCSI BootTest/SCSI Bus Support Test. Enable Secure Boot on SLP. flash ME region change request. Modify the CommonSetupLib to display total L1 cache size in Setup menu. PCH PCIE CTLE setting is missed after PCH RC updating in D108. UpdateSmbios function of UBA is not executed. [EPSD100029680] NMI button function does not work. [EPSD100029628] Processor information in BIOS Processor Configuration page display "N/A". [EPSD100029293] When install Windows7sp1 will show blue screen. [EPSD100029621] Window 2K8 SP2 32/64 can't install and it will show BSOD with legacy mode [EPSD100029308] Starting from BIOS 92, HECI error logged in dmesg after SUSE 12 setup in UEFI mode. Fixed iBMC vidio can't be disabled. Fixed NMI buttom code lost during RC sync. Sync ME related ASL code. Fixed Xd feature didn't be enable due to code sync issue. Fixed D110 BIOS can't update issue. [EPSD100248881] After install drivers,device manage still show yellow mark. [EPSD100028791] There are some fail items when running Win2012R2 Cert test. Porting Smbios Type 148 to SLP. Fix CpPcPlatPkg Klockwork scan issue. [EPSD100248820] System hang up on 0x34 randomly when MFG jumper is connected on RO board. [EPSD100028598] Get Node Manager Power Characterization Range value is 00 via ipmitool NM command Change "System Date" help string following product Setup Spec. [EPSD100029148] Boot Manager couldn't detect SATA DVDROM under legacy RSTe RAID Mode. [EPSD100028942] System time will become 01/01/2015 after set System Date before year 2015 and then Save & Reset. [EPSD100248985] 71605 Raid card OpRom control option cannot be seen under UEFI mode. [EPSD100248795] "Load User Default Values" option no function for some BIOS settings. Sync CRB BIOS V90_14 RC 1.2 Microcode upate to 0002E BP/CP core sync to latest common tree. Roll back CP sync 4K HDD support code. Update ME update code according to the new ME layout. [EPSD100029105] New connected Network device will not list in bottom of DBOL. Sync latest CPPC code. Update ME FW to PC RC3 4.0.3.36 [EPSD100246878] It is ineffective when you press NMI button. [EPSD100029092] New connected USB device will not list at buttom of DBOL when USB boot priority is disabled and SBOL snapshot has been taken. [EPSD100248942] No error report both in Error manage and SEL viewer when Microcode is updated missing. Update FVLEGACYCSMBIN to CL_255301. [EPSD100029339] Set core number to 1 under "Active Processor Cores" option, save and reboot to OS will occur BSOD:ACPI_BIOS_ERROR. [EPSD100029073] Memory ECC error injection information is incorrect in both SEL Viewer and system log. [EPSD100249024] ITK support for OA2.x. Based on EA team suggestion to set the PCH PCIE Rx CTLE in High Speed I/O (HSIO) Control Register. [EPSD100247152] Error message didn't display correctly in Error Manager after clear remove CMOS battery or clear CMOS jumper. Update RSTe option ROM and EFI driver to be version 4.3.0.1018. [EPSD100248853] DFT 1914 rule test was failed. [EPSD100248881] After install drivers, device manage still yellow mark. [EPSD100248945] UEFI RHEL7.0 and UEFI RHEL 7.1 will be hang in black screen with a cursor under UEFI mode. [EPSD100248131] Sysinfo_v14.0.4: incorrect BIOS option was dumped in 'BIOS Settings' part in sysinfo_log.txt. [EPSD100248865] SUT can't boot up after 4 hynix 16G DIMMs attached on Beta1 board. [EPSD100248472] Total Memory can't indentified on Main and Memory Configuration screen with "hynix 16G" memory. [EPSD100248817] No nvram auto recovery error i BIOS error manage after corrupt whole nvram region. 'PCI out of resource error" can't triggered in error manage. [EPSD100248449] pci_error_sig_check() has warnings about pcie root port setting. EPSD100248595] Syscfg_v14.0.6: Run cmd syscfg /bbosys "" 7 6 5 4 3 2 1 change bbo order will be fail. [EPSD100248558] 3% of the Beta1 build FAB2 boards can not keep the correct system date and time after reboot/cold boot. [EPSD100029353] Temp WA to SUT can't boot up after 4 hynix 4G/8G DIMMs attached on Beta2 board. [EPSD100029259] Failed to boot from Legacy PXE for X540-T2 Add-on card. (Error message: PXE-EC8: !PXE structures was not found in UNDI driver code segment.) [EPSD100028746] After disable the "Reset on CATERR" in BIOS, SUT still reset after CATERR occurred for a while. [EPSD100029115] Console Redirection working with previous settings when SOL is Enabled. [EPSD100247152] Error message didn't display correctly in Error Manager after clear remove CMOS battery or clear CMOS jumper. [EPSD100028126] [2nd sourcen M/B] System stops at 234 loops during DC cycle test. Integrate new version option ROM and EFI driver for ESRT2. [EPSD100029073] Memory ECC error injection information is incorrect in both SEL Viewer and system log. [EPSD100248814] F10 key behavior is inconsistent after change different BIOS setting. [EPSD100029076] SBO is still enabled when use syscfg utility to change Boot Order. [EPSD100247075] Need develop a debug revision of runtime setvariable driver. Fixed hynix 4G DIMM can't enter OS issue. [EPSD100029115] Console Redirection working with previous settings when SOL is Enabled. [EPSD100028476] BIOS Nic configuration show IO module 82599 as X520. [EPSD100248538] System will pop-up warning message after change some settings via BIOS setup. [EPSD100245845] Console Redirection item will show disable and gray out when press F9 to load default BIOS setting.(setup browser issue) [EPSD100248007] CP_CR_1258:EPSD100242284: sysinfo V13.10: The value of "Microcode Revision" in sysinfo_log.txt is not consistent with Setup Page value with two CPUs. [EPSD100028808] No Payload Boot entry in Boot Manager page after update BIOS with 'Pay Load Boot' enabled. [EPSD100029102] "PCI out of resource error" can't triggered in error manage. [EPSD100028253] Flash ME fail via OFU tool that will show error message "error while parsing the cfg file [EPSD100248478] iFlash32_v14.0.2:ME update fail [EPSD100029234] Fail to install legacy Windows2012R2, UUT will BSOD and reset after loading files. Update micro code to 001E Sync V89_03 RC and ACPI table update. [EPSD100248757] UUID will chang back to primary value after remove MFG jumper. [EPSD100028283] The word string "Legacy Network Device Order" would be changed when remove USB key during storage OPROM/Network OPROM. [EPSD100248532] Change Execute Disable Bit option then press F10 or select "Save Changes and Exit", SUT not reboot will boot to the first boot device. [EPSD100246997] Intergrated IO Configuration /fast boot/OverClocking/SVID/FIVR/Override ICC Spread Spectrum Configuration/ list in BIOS cap file with ITK ,but these option does not display in BIOS Setup. [EPSD100028454] SATA SI setting data is different between BIOS RD006 and RD032. [EPSD100248758] SUT will hang up on first power after corrupt nvram blocks. [EPSD100248791] DP port and VGA Port Output options don't displayed in D087 BIOS. [EPSD100028454] SATA SI setting data is different between BIOS RD006 and RD032. [EPSD100028401] A few of symptom about onboard NICs can found within Type 41. [EPSD100028542] SUT could not dump the NVRAM area for onbaord NIC by running the dmpstore EFI shell command under MFG mode. [EPSD100028616] System cannot occurs memory multi-bit event after switch rework multi-bit memory jumper. Sync CRB bios V88_05, RC 1.0 and microcode update. Updated to Legacy ESRTII A.15.06081622I. Updated to Legacy/EFI RSTe 4.3.0.1013 [EPSD100029151] SUT would hang at black screen after boot to SATA DVDROM under Legacy ESRT2 RAID Mode. [EPSD100248005] CP_CR_1277:Fix Klocwork Scan failures. [EPSD100027682] SUT would hang at 80port 0x96 after set both NIC1 Controller/NIC2 Controller to disabled and then save & reset. [EPSD100245821] At UEFI RAID ESRT2 mode, "Check All" option no function when config RAID. [EPSD100028004] The "Mass Storage Devices" option is hidden when press F9 to load default. [EPSD100027855] 4 PCIe slots table within Type 9 wtih BIOS D0017. It's not consistent with HW designed. [EPSD100027856] All Slot Type field within Type 9 under BIOS D0017 having similar value. [EPSD100027631] The prompt time of the OPROM is too short while RSTe RAID had been set. [EPSD100027682] SUT hang at 80port 0x96 after set both NIC1/NIC2 controller to disabled. Solve issue that OEM Logo shows at diagnostic even Quiet boot is disabled. ID change based on D050. [EPSD100027442] "BMC DHCP Host Name" is still grayed out and inactive even IP Source is set to "Dynamic". [EPSD100028365] Add blank line between each NIC Type in BIOS Setup/NIC Configuration. [EPSD100028435] Delete SGX Option in setup. [EPSD100247788] Linux(both Redhat7&SUSE12) OS installation failed in both legacy and UEFI mode. [EPSD100028420] SUT would not boot into EFI shell automatically in BIOS Recovery mode. [EPSD100247939] Backup BIOS cannot be updated successfully by command:iflash32.efi -u D036.cap UpdateBackupBios Update ME FW to 4.0.2.44 [EPSD100247173] SUT can not use Oa2intel tool to insert OEM data. [EPSD100247531] With Grantley code, LegacyRegion->Unlock can not enable memory write under release mode [EPSD100028393] Unknown field "DPR Memory Size" appeared after set "Intel(R) TXT" to Enabled in BIOS Setup. [EPSD100247664] SUT would auto reboot when boot into RMS25JC080 OPROM about 20 sec. [EPSD100027352] Primary BIOS Version showed as "8" in diagnostics screen. [EPSD100028402] Incorrect value of Cache Configuration Field for L2 and L3 cache within Type 7. [EPSD100247513] Some ports connector information lost in SMBIOS. [EPSD100027740] USB device is still functional even when the USB Controller option is disabled. [EPSD100247538] syscfg cannot read "Current Memory Speed" under Windows. [EPSD100027695] Help Text for item "Correctable Error Threshold" is not correct. [EPSD100027847] There is no retries of the boot when change Boot Option Retry to enable. [EPSD100027594] The Console Redirection option is gray out and unchangeable after press F9 to load BIOS default values. [EPSD100028087] In BMC LAN Configuration/User Configuration, the default privilege of User3 is Administrator, but it should be User. [EPSD100247593] Failed to write the GUID to BIOS flash in MFG mode. For AutoBuild debug after code merge. [EPSD100027353] Fix Processor/Memory info not correct in OemPostScreen issue. [EPSD100247230] DIMM Thrm Mrgn 1 sensor is always in unknown state EPSD100247059] BIOS need to filter ITK security items. [EPSD100027936] "Intel(R) Storage Module" showed as "None" even connected RMS25JB080. [EPSD100027775] No OPROM for IOMs during POST and new network boot devices listed in Boot Maintenance Manager page after boot into BIOS Setup. [EPSD100027731] Fix POST dignostic screen doesn't display USB keyboard/mouse detected info. [EPSD100247241] Boot Order can't be changed when SBO is enabled at BIOS R011. Update CPU Microcode to 0000001D revision. [EPSD100246833] No beep code during POST. [EPSD100246630] No "Early System Boot Timeout" option at Advanced Boot Options, but PCSD BIOS Setup Design Document has. [EPSD100027474] It cannot identify which one is NIC1 or NIC2 for Onboard LAN UEFI boot device. [EPSD100028038] No COM Port device in device manager in W2k12R2-64. [EPSD100247177] Enter BIOS setup through User password then Press F9 to load default, all BIOS settings becomes available and can be modified. [EPSD100027342] MSR IA32_MISC_ENABLE bit 34 is not 1 when execute disable bit set to disable. [EPSD100027672] Type 7 Error Correction type is incorrect in SMBIOS log of BIOS D008. [EPSD100027373] Socket Designation string within type 4 not consistent with requested displayed "CPU x". [EPSD100027511] Incorrect value of Device Type field within SMBIOS Type 41 for integrated SATA Controller. [EPSD100027503] USB flash drive would not detect as a floppy drive when set the Storage Emulation to "Forced FDD". [EPSD100247165] Yellow mark display in device manager. [EPSD100027643] "Preferred_PM_Profile" field is not correct in ACPI FADT Table. [EPSD100027943] "Creator ID" is empty in ACPI TCPA Table. EPSD100027326 It display “Press F7 to show boot menu option” during POST, but S1200SP not support this function. [EPSD100027343] When system power on without memory, speaker cannot beep. [EPSD100027443] Speaker does not beep during speaker 1KHz to 10KHz test Update ServerAmiRestrictedPkg binary to CP CL203208 [S1200SP][No slighting]MSR Value is wrong after change CPU Power and Performance setting [S1200SP][No slighting] There is no item iSCSI Option ROM in BIOS Setup [S1200SP][EPSD100027700]Item name is not correct for "NIC2 Controller" in BIOS Setup. NO_SIGHTING: Sync BootOrder code from PCSD_COMMON tree [S1200SP][No Slighting]Some RAID mode under UEFI mode issue. [S1200SP][EPSD100247056]Fixed The option of Primary Video and VGA Port Output is not gray out and accessible issue. [S1200SP][EPSD100027637] Fixed No screen output when set "VGA Port Output" to "Processor graphics" issue. [S1200SP][EPSD100027741]Sometimes the "Submit fail for form:!." box will pop up when press F10 to save changed BIOS setting [S1200SP][No Sighting]Some RAID mode and UEFI issue For RO SKU, SE SKU and EV. [S1200SP][EPSD100027341] There is no popup message to notice user to confirm when pressing F10 Hot Key in BIOS Setup. [EPSD100027381]There is no Help Text for items "Uncore Power Management", "CPU P State Control" and "CPU C State Control" in BIOS Setup. [EPSD100027409]The Data rows arrangement not align with title under error manager. [S1200SP][EPSD100027508]System Date did not roll back to 01/01/2013 after CMOS battery or clean CMOS with jumper [EPSD100027409]The Data rows arrangement not align with title under error manage [EPSD100244684]Enter 3 times incorrect Admin PWD, no error log at Error manager and SEL log [S1200SP][No slighting] Update setup page according 0.9 setup spec [EPSD100027511] - Incorrect value of Device Type field within SMBIOS Type 41 for integrated SATA Controller. [EPSD100027515] - All of onboard devices have similar value within SMBIOS for Bus Number, Device Number and Function Number field except Integrated SATA Controller. [EPSD100027514] - Incorrect value of Device Type field within SMBIOS Type 41 for device enabled or not. [EPSD100027507] - Reference Designation String within Type 41 for onbaord network not consistent HW designed. [EPSD100027509] - Onboard IO Module information could found in type 41 even connector removed from current baseboard. [EPSD100027373] Socket Designation string within type 4 not consistent with requested displayed "CPU x". [EPSD100247027] Type 4 Socket Designation string is "U3E1" , not "CPU x" [S1200SP][EPSD10002766] The HDD's(ST6000NM0004) capacity detects wrong in BIOS [S1200SP][No slighting] Pvmode test error on the S1200SP platform. [EPSD100027506] DIMM manufacturer field did not be filled with "Empty/NO DIMM" when no DIMM populated on slots. [EPSD100027462] The value of memory Device Locator string within SMBIOS not consistent with silkscreen printed. [EPSD100027471] All of DIMMs populated on SUT having similar Asset Tag string within SMBIOS. [EPSD100247155][Platform/Common] [Enable FRB2 and make sure it workable then change FRB2 to disable, at the first time FRB2 still has function.] Memory and PCIe error logging feature add [EPSD100246882][Password clear jumper function is ineffective] [EPSD100246757]Windows2012 R2 OS can not be installed or booted-into with all 4 DIMMs applied VT-D enable function [EPSD100027384]["AHCI Controller Configuration" is still showed as "8 ports of 6Gb/s SATA" even "AHCI Capable SATA Controller" is set to Disabled..] [EPSD100247017][No Gigabit NIC driver can be found in EFI shell under UEFI mode.] [EPSD100027382][There is a lot of unsupported selection for item "Memory Operating Speed Selection" in BIOS Setup..] [EPSD100027387][There is no item "iSCSI Option ROM" in BIOS Setup.] [EPSD100246581][MSR value is wrong after change CPU Power and Performance setting] [EPSD100027345&EPSD100246426&EPSD100027330][Getting the value "Not Supported" even enabled or disable BIOS option "Direct Cache Access".] [EPSD100246961,EPSD100246874] Fixed issue "S1200SP Mezz device lost when slot4/6 has PCIE add-in card installed" and "SUT will hang when install PCIE RAID card in slot 4" Add SMBIOS type10 for SE/RO and Type13 issue fix [EPSD100246877] System can't shutdown Update RC 071_08 Add iGFX legacy option rom. Update CPU microcode. Update ME firmware to revision to:4.0.2.5 Add RSTe Legacy oprom and UEFI driver. add ESRT2 oprom. Added the UBA Multi Platform support for S1200SP platform. Add UBA Oprom control and PCIe Link Speed function Add password & NMI button & Frontpanel lock support Add PMI acpi table support. Add system uuid support [EPSD100246852] Fixed Power LED of Front Panel is always off in Chassis issue. Fixed SilverPssLC Sku no Pcie Slot6 item in setup Fixed BIOS setup can't get ME firmware revision number Update GPIO table for PCIe slot5 clock output. Fixed SUT can not update FD regions or ME regions with iflash32 utility issue. Update SATA Port number string from "0-5" to "0-7". SMBIOS type 8/9/10 LC sku porting Update SPS ME FW to support C0 PCH and fixed SATA port can't detect HDD issue. Fix system will have blue screen when install windows 2008 R2 under legacy mode (Linux legacy install only) Temp WA for SMBIOS type 1/2/3, need to be roll back after final solution completed Modify TCO base address update BP core to 1.2.1.1 Fixed debug serial port output abnormal issue update legacy stack binary, enable usb stack Fixed Reovery mode support code and memory info dpx add in RC code