SRCD Installation instructions
==============================

'srcd' is the remote access service for Intel(R) Storage RAID Controllers.
With 'srcd' running, you can manage Disk Arrays from a remote workstation
by the Intel(R) storage management software (e.g. Storage RAID Console)
via TCP/IP.
If you configure /etc/srcd.conf, you can send SNMP traps or execute an
external program (e.g. mail) every time, when a Disk Array Controller 
event occurs. See comments in /etc/srcd.conf for details.

HOW TO INSTALL:

  1. Log in as 'root'.

  2. Unpack srcd-v.vv-xxxx.tgz (may be srcd-1.09-suse.tgz or srcd-1.09 redhat.tgz):

       tar xvfz srcd-v.vv-xxxx.tgz

  3. Run 'install.sh'. It will interactively set up a start script 
     and a file '/etc/srcd.conf':

       ./install.sh
     
  4. Edit /etc/srcd.conf, if you want to send SNMP traps or execute an
     external program when controller events occur.

  5. Start 'srcd' if not done by 'install.sh':

       SuSE-Linux:   /sbin/init.d/srcd start
       RedHat-Linux: /etc/rc.d/rc2.d/srcd start

  6. Enjoy remote management of Intel(R) Storage RAID Controllers.



*** end of file ***