This SUP was created June 11, 2003

	SHG2 System Update Package (SUP)

	Disk 1 of 1

	BMC			0.22
	HSC			.10
	FRU/SDR		SHG2 5.0.9
	BIOS		Production 09 (Build 0039)


DEPENDENCIES:
	You MUST boot system from SYSTEM RESOURCE CD to run this disk.

CONTENTS
	1.bat		[Creates SUP		floppy disk]
	2.bat		[Creates BIOS		floppy disk]
	3.bat		[Creates BMC		floppy disk]
	4.bat		[Creates FRU/SDR	floppy disk]
	5.bat		[Creates HSC (SC5200)	floppy disk]
	DATA.LZH        [bios, bmc, hsc, fru/sdr files compressed with lha]
	INSTALL.TXT     [this file] 
	LHA.EXE         [compression/decompression utility]
	license.txt     [license agreement]
	MAKEDISK.BAT    [Menu for creating individual floppy disks]
	NED.CFG         [text editor configuration file]
	REBOOT.COM      [Restart computer]
	restart.bat     [Batch file calling REBOOT.COM]
	SETUP.BAT       [Calls sup.bat within a command process]
	sup.bat         [Initiates floppy disk creation process]
	sup.txt         [Release notes for the SUP package]


INSTRUCTIONS:

1) Extract the contents of SUP executable file to a DOS-formatted floppy disk.
If you don't have DOS available, boot the server to the System Resource CD that
shipped with the server.  At the menu, select "Quit to DOS".  From the C:\
prompt, type "FORMAT A:" and press Enter.  NOTE: All ApplicationName=Intel<r> SHG2 server board SHG2 SUP

System Resource CDs include ROM-DOS; you don't necessarily have to use the
System Resource CD that shipped with your server to create a formatted floppy.

2) Boot the server from the "SERVER BOARD RESOURCE CD" that shipped with
the Intel server.

3) After booting from the CD, select "QUIT TO DOS" from the menu.

4) Place the System Update Package disk in the A: drive and type 
the command A:\SETUP.BAT then press ENTER.

5) Read the license agreement.

6) Accept the license agreement to continue.

7) The System Update Package menu will appear. Perform the steps in numerical 
order to update the firmware and the BIOS.  If you have questions on any of 
the utilities, please view the SUP.TXT and README.TXT files.

9) After finishing the BIOS update, reboot the server and press F2 to 
customize the BIOS settings.

For updates and technical assistance, please visit
http://support.intel.com/support/motherboards/server/

[END OF INSTALL.TXT]