BIOS release 1.5 for IS-10 / IS-11 / IS-12 / IS-20  V1.0


Release information:

[ENGLISH]

1. Please use flash utility AWDFLASH v8.24F to update IS-10 / IS-11 /
   IS-12 / IS-20 BIOS.
2. First release for IS-20.
3. Remove option "32MB" from BIOS item "Frame Buffer Size".
4. Fixed incorrect voltage display in "DDR VT Voltage" and "AGP VDDQ
   Voltage".
5. Revise CPU Warning Temperature upper limit to 95 degrees and set
   default to 85 degrees.
6. Revise CPU Shutdown Temperature upper limit to 100 degrees and set
   default to 95 degrees.
7. Fixed the issue that CPU temperature will be detected wrong after
   resuming from S3 mode.
8. BIOS compile date: 02/23/2004


[中文]

1. 請使用更新程式 AWDFLASH v8.24F 更新IS-10 / IS-11 / IS-12 / IS-20 BIOS。
2. 首次對 IS-20發行。
3. 從 "Frame Buffer Size" 移除 "32MB"  之選項。
4. 修正電壓在 "DDR VT Voltage" 及 "AGP VDDQ Voltage" 顯示之錯誤。
5. 修改 CPU 警告溫度上限至 95 度且預設為 85 度。
6. 修改 CPU 關機溫度上限至 100 度且預設為 95 度。
7. 修正從S3 模式回復後 CPU 溫度顯示錯誤。
8. BIOS 日期： 02/23/2004。



*********************************  NOTE  *********************************

1. How to upgrade BIOS:

 a. Boot into MS-DOS or "Safe mode and command prompt" if you are using
    Windows95/98
 b. Run "is1215.exe" to extract all files.
 c. Run "runme.bat"

   ***  Please notice that we suggest you flashing the bios with switches

           "/py /sn /cd /cp /cc /cks /R" or by "runme.bat".

 d. For more detail, please visit:

    http://fae.abit.com.tw/cht/download/bioshelp.htm  (Chinese)
    http://fae.abit.com.tw/eng/download/bioshelp.htm  (English)

2.After BIOS updated, pull off the power cord and then clear the CMOS data
  via jumper before restarting system please.