BIOS release 1.5 for IS7-V V1.0 Release information: [ENGLISH] 1. Update CPU Micro Code. 2. Shows MAC Address of onboard LAN chip in System Configuration section. If "Onboard Network Controller" is disabled. 3. Add AWDFLASH v8.32 support "ALT+F2" hot key function. 4. Enhance compatibility with certain Power Supply. 5. Calibrate CPU temperature. 6. BIOS compile date: 04/27/2004 [中文] 1. 更新 CPU Micro Code。 2. 當 "Onboard Network Controller" 關閉時, MAC Address 仍會出現在 System Configuration 中。 3. 新增 AWDFLASH v8.32 支援 "ALT+F2" 熱鍵功能。 4. 增加對部分電源供應器的相容性。 5. 校正 CPU 溫度。 6. BIOS 日期: 04/27/2004 ********************************* NOTE ********************************* 1. How to upgrade BIOS: a. Boot into MS-DOS or "Safe mode and command prompt" if you are using Windows95/98 b. Run "is7v15.exe" to extract all files. c. Run "runme.bat" *** Please notice that we suggest you flashing the bios with switches "/py /sn /cd /cp /cc /cks /R" or by "runme.bat". d. For more detail, please visit: http://fae.abit.com.tw/cht/download/bioshelp.htm (Chinese) http://fae.abit.com.tw/eng/download/bioshelp.htm (English) 2.After BIOS updated, pull off the power cord and then clear the CMOS data via jumper before restarting system please. ============================================================================